User's Manual

When the beeper is
selected (default)
When the vibrator is
selected
When both the beeper
and vibrator are selected
(The current selection is highlighted.)
Adjusting the LCD Contrast,
Beeper Volume and Touch Screen,
and Switching the Beeper & Vibrator
While holding down the M1 key or right-hand trigger switch (M4), press the
PW key. The main adjustment screen appears which differs depending upon
the current state as shown below.
After adjustment, press the ENT key or no keys for five seconds. The new set-
tings will be registered and the main adjustment screen will disappear.