User's Manual
Table Of Contents
- About This Manual
- Liability Limitations
- Customer Registration
- Usage Precautions
- SAFETY PRECAUTIONS
- Wireless Equipment
- Components and Functions
- Input Method
- Proper Care of the BHT
- Preparation
- Step 1 Charging
- Step 2 Attaching stylus
- Step 3 Turning ON the Power
- Scanning codes
- Battery Power Level Indicator
- How to Replace the Battery
- Using the BHT after Long Non-Use
- Troubleshooting Guide
- Turning ON/OFF the Backlight
- Resetting and Full Resetting
- Battery Recycling Request
- Recycle Regulation（for Turkey）
Scanning codes
Follow the procedure below to scan codes.
1
Turn the BHT power ON.
2
Select code scanning test of BhtShell from
desktop menu.
Press the trigger key.
The BHT emits an illumination LED.
3
Hold the BHT close to the code to align the
illumination LED.
When the BHT has read the code
successfully, the indicator LED will
illuminate in blue.
Codes can be read also by pressing the
Scan key.
Point
The code scanning method may differ
depending on the application. Perform
scanning in accordance with the
instructions provided in the application
User’s Manual.
Power key
Illumination light
Blue LED
Illumination light