User Manual

System Program malfunction
■ Problem
During execution of System Program, the System
Program has attempted to write onto the write-pro-
tected area of the memory.
(xxxxxxxx: Error address)
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
■ Solution
Unload and reload the rechargeable battery car-
tridge, then turn on the power. If this error occurs
frequently, contact your system administrator.
■ Problem
During execution of System Program, the System
Program has received an invalid command code.
(xxxxxxxx: Error address)
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
■ Solution
Unload and reload the rechargeable battery car-
tridge, then turn on the power. If this error occurs
frequently, contact your system administrator.
XXXXXXXX 01
Reload the battery
to restart!
tskid:XXXXXXXX
ercd :XXXXXXXX
addr :XXXXXXXX
02
Reload the battery
to restart!
Resume data lost
■ Problem
No resume data has been retained since the BHT
was not normally powered off and then left with no
battery cartridge loaded or with a discharged bat-
tery cartridge loaded even if the resume function
had been set to ON.
The BHT displays this error message for 3
seconds and automatically runs the execution
program from the point of start-up.



No resume info.
has been retained.
Program restarts
automatically.