User's Manual
Table Of Contents
- US and Canada Regulations
- Declaration of Conformity(For European Union)
- Preface
- How this book is organized
- SAFETY PRECAUTIONS
- Chapter 1 Quick Guide
- Chapter 2 Getting Started the BHT and System Menu
- Chapter 3 Communications Operations of the BHT-202B-CE/202BW-CE
- Chapter 4 Error Messages
- Chapter 5 Handling the CU-200(Option)
- Appendices
Chapter 3 Communications Operations of BHT-202B-CE/202BW-CE
125
3.5.2 Connection Using ActiveSync
When connected by IrDA, USB, or connector interface
IrDA communication
Arrange the BHT and host computer with their IrDA ports facing directly each other as shown below.
No ActiveSync can be used for connection via the CU-201 (RS-232C interface).
For the operating procedure of ActiveSync on the BHT, refer to Chapter 2, Section 2.5.4, "[2.2]
ActiveSync (IrDA)."
USB communication
Connect the BHT to the host computer by using a USB interface cable as shown below.
For the operating procedure of ActiveSync on the BHT, refer to Chapter 2, Section 2.5.4, "[2.4]
ActiveSync (USB)."
Host Computer
IrDA communication
BHT
Host Computer
USB interface cable
BHT