User's Manual
Table Of Contents
- US and Canada Regulations
- Declaration of Conformity(For European Union)
- Preface
- How this book is organized
- SAFETY PRECAUTIONS
- Chapter 1 Quick Guide
- Chapter 2 Getting Started the BHT and System Menu
- Chapter 3 Communications Operations of the BHT-202B-CE/202BW-CE
- Chapter 4 Error Messages
- Chapter 5 Handling the CU-200(Option)
- Appendices
150
Connector Interface
Specification: USB1.1, Full-speed compliant, RS-232C interface
Connector: TCX3171 HOSIDEN
Pin assignment: See below.
Pin No Signal name Data direction
1 GND −
2 D+ (USB) Input / Output
3 D- (USB) Input / Output
4 VBUS (USB) −
5 CTS (RS-232C) Input
6 RxD (RS-232C) Input
7 RTS (RS-232C) Output
8 TxD (RS-232C) Output
(Note) 1.The input/output direction is stipulated from the BHT side.
2.Use the exclusive cable only.
Wireless Interface (BHT-202BW-CE only)
Specification: Spread Spectrum (Direct Sequence Spread Spectrum)
Standards: RCR STD-33、ARIB STD-T66
Radio frequency: 2400 to 2497MHz
Transmission speed: 11Mbps/5.5Mbps/2Mbps/1Mbps
Channel(s): 14
Pin 1 Pin 7
Pin 8 Pin 2