Bar Code Handy Terminal User's Manual BHT-7000

Chapter 2. Getting Started the BHT-7000 and System Mode

Adjusting the LCD contrast

You can adjust the LCD brightness to 8 contrast levels.

1) Use the * or * keys to select the LCD CONTRAST line.

2) To decrease the contrast, press the

* key; to increase it, press the * key.

Switching the beeper & vibrator

You may choose any of three ways—beeping only, vibrating only, or beeping &

vibrating as a confirmation of completion of bar-code reading.

(1) Use the

* or * key to select the BEEPER or VIBRATION.

(2) Press the

* key twice, and the BEEPER will become highlighted.

To choose beeping only, press no key. To choose vibrating only, press the

key twice. To choose beeping & vibrating, press the

* once.

Make sure that your selection is highlighted.

Adjusting the beeper volume

You can adjust the beeper volume to four levels--High, Medium, Low, and OFF.

1) Use the * and * keys to select the BEEPER VOLUME line.

2) To turn down the volume, press the

* key; to turn it up, press the * key.

After making the above setting, either press the ENT key or press no key for five

seconds, and the new setting will be fixed and the above screen will disappear.

* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of , ,

, and keys, respectively