User`s manual

91
2D Code Handy Terminal
2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6] [7] [8]) to select the item to
be set.
3. Use the cursor keys ([◄] [►]) to select settings value.
4. Press the ENT key or BS/C key for the settings value to be valid and then return to the SET 2D
CODE screen.
“2:iQRCODE”：Detailed settings for iQR Code
1. Select “2:iQRCODE” at SET 2D CODE menu and then press the ENT
key.
SET iQRCODE screen displays.
（Concatenated iQR code settings ）
“1：READING”：
Enable/disable concatenated iQR Code
For iQR Codes, there is a function where data is coded after being spilit
into a maximum of 16 segments and original data is restored when the
codes are read. These segmented codes asre called concatenated
codes.
“2：EDIT MODE”：
Set the scan mode of concatenated iQR Code.
“EDIT”: Edit mode
The data is stored in memory when all segmented codes have been read.
A reading error occurs if the volume of data exceeds 65,280 bytes. The beeper sounds at 500 ms
intervals, and all read data is discarded.
“NON-EDIT”: Unedited mode
The data is stored in memory each time a segmented code is read.
In edit mode, when the first code of the concatenated code is read the beeper sounds twice and the
system enters concatenated code reading status.
When subsequent concatenated codes are read the beeper sounds once. After the final code has
been read, the beeper sounds three times and reading is complete.
- Point - z If iQR codes other than concatenated codes are read during concatenated code reading
then concatenated code reading ends, the read concatenated codes are discarded, and
the data for the last iQR codes read is saved.
z When the illuminating indicator LED is set to OFF in trigger switch operation (Auto-off
mode, Momentary mode, and alternate) or when the raeding of the next concatenated code
is not completed within approx. 3 seconds in modes other than Auto-off mode, the data
read so far is cleared and concatenated code reading ends.
z When other concatenated codes are read before a concatenated code has been read
completely, the data read so far is cleared and reading begins on the new code.