BHT-700BB-CE/700BWB-CE/700BWBG-CE Preface Thank you for using the BHT-700BB-CE/700BWB-CE/700BWBG-CE DENSO WAVE Barcode Handy Terminal. Please read this manual thoroughly prior to operation to ensure full use of the product’s functionality, and store safely in a convenient location for quick reference even after reading.
Barcode Handy Terminal Customer Registration and Inquiries Customer Registration To allow us to provide our customers with comprehensive service and support, we request that all customers complete a Member Registration Form. Registered members will be offered the following privileges. • The latest upgrade information • Free exhibition and event information for new products • Free Web-information service "QBdirect".
BHT-700BB-CE/700BWB-CE/700BWBG-CE About this Manual • Due to improvements and so on, the content of this manual may be subject to change without prior notice. • The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent. • Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, we kindly ask that any questionable content, mistakes, or omissions be reported to DENSO WAVE.
Barcode Handy Terminal Viewing this Manual − About the Bookmark The PDF Bookmark function can be used to jump to the Contents page. (1) Click the “Bookmark” tab. to search for the desired item. (2) Click (3) Click the item to be read. (1) Click the “Bookmarks” tab. (2) Click “+” to search for the desired item. (3) Click the item to be read.
BHT-700BB-CE/700BWB-CE/700BWBG-CE − Searching by Word The PDF search function can be used to jump to the target page by entering words or characters related to the item being searched. (1) Click the Search icon. (Or select “Edit” – “Search”.) (2) Enter the word(s) or character(s) to be searched for. (3) Click [Search]. (1) Click the Search icon. (2) Enter the search word(s) or character(s). (3) Click [Search].
Barcode Handy Terminal Related Documentation • BHT-700-CE API Reference Manual • BHT-700-CE Class Library Reference Manual • 2D Code Scanner/Barcode Scanner Keyboard Interface with BHT-CE kbifCE User’s Guide vi
BHT-700BB-CE/700BWB-CE/700BWBG-CE SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Please READ through this manual carefully. It will enable you to use the BHT and CU correctly. Always keep this manual nearby for speedy reference. Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in bodily injury and substantial property damage.
Barcode Handy Terminal Handling the battery cartridge • Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury. • Do not carry or store the battery cartridge together with metallic ball-point pens, necklaces, coins, hairpins, etc. Doing so could short-circuit the terminal pins, causing the batteries to rupture or the battery fluid to leak, resulting in a fire or bodily injury.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Handling the battery cartridge • Charge batteries in temperature from 0°C to 40°C (32°F to 104°F). • Never charge a wet or damp rechargeable battery cartridge. Doing so could cause the batteries to break, generate heat, rupture or burn. Handling the BHT • If smoke, abnormal odors or noises come from the BHT, immediately turn off the power, pull out the battery cartridge, and contact your nearest dealer. Failure to do so could cause smoke or fire.
Barcode Handy Terminal Handling the CU • Never disassemble or modify the CU; doing so could result in an accident such as fire or malfunction. • Never put the CU in places where there are excessively high temperatures, such as inside closed-up automobiles, or in places exposed to direct sunlight. Doing so could affect the housing or parts, resulting in a fire. • Avoid using the CU in extremely humid or dusty areas, or where there are drastic temperature changes.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Declaration of Conformity (For European Union) Hereby, DENSO WAVE INCORPORATED, declares that this BHT-700BB-CE, BHT-700BWB-CE, BHT-700BWBG-CE is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Contents Preface............................................................................................................................................... i Customer Registration and Inquiries ................................................................................................. ii About this Manual..............................................................................................................................iii SAFETY PRECAUTIONS................................................
2.6.4 Full Reset Method .................................................................................................. 29 2.6.5 Memory Contents after Reset/Full Reset................................................................ 30 2.6.6 Applications Started Up when Performing a Reset/Full Reset................................ 30 Chapter 3 Basic Operation......................................................... 31 3.1 Scanning Barcodes .................................................................
Chapter 5 Communication ....................................................... 113 5.1 Connector Communication.............................................................................................. 114 5.2 Infrared Communication.................................................................................................. 115 5.3 Bluetooth® Communication ............................................................................................ 116 5.3.1 Notes for Bluetooth® Operations .........
Chapter 9 Appendices.............................................................. 143 9.1 CU-700 Functions ........................................................................................................... 144 9.2 Components and Functions ............................................................................................ 145 9.3 CU-700 Power Supply..................................................................................................... 147 9.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 1 Outline This chapter describes the BHT system and provides an overall outline of the BHT. 1.1 System Configuration ···················································································2 1.1.1 Hardware Configuration ···················································································2 1.1.2 Software Configuration·····················································································3 1.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 1.1 System Configuration This section describes the hardware required for the barcode data collection system used by the BHT and the BHT software. 1.1.1 Hardware Configuration In addition to the BHT, the following hardware is required for the barcode data collection system used by the BHT. Please note that certain components of the required hardware will differ depending on the type of communication used. Refer to "Chapter 3 Basic Preparation" – "3.
Barcode Handy Terminal 1.1.2 Software Configuration [1] BHT Operating System (OS) Microsoft Windows CE 5.0 [2] Application Program Development Environment Refer to "BHT-700-CE API Reference Manual".
BHT-700BB-CE/700BWB-CE/700BWBG-CE 1.2 Component Names and Functions 1.2.
Barcode Handy Terminal No. Name (1) Beeper (2) Charge LED (3) Indicator LED Function and Description Illuminates in red during charging and turns green upon completion of charging. Indicates the barcode read status. Illuminates in blue when the BHT has successfully read a barcode. (4) (5) Receiver IEEE802.11a/b/g Used to communicate with the wireless LAN access point. built-in antenna Do not cover this antenna section with metal-evaporated tape or by hand.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 42-Keypad (2) (3) (4) (1) (5) (6) (7) (11) (10) (9) (8) (13) (14) (12) (15) (16) (17) (18) (19) (21) (20) 6
Barcode Handy Terminal No. Name (1) Beeper (2) Charge LED (3) Indicator LED Function and Description Illuminates in red during charging and turns green upon completion of charging. Indicates the barcode read status. Illuminates in blue when the BHT has successfully read a barcode. (4) (5) Receiver IEEE802.11a/b/g Used to communicate with the wireless LAN access point. built-in antenna Do not cover this antenna section with metal-evaporated tape or by hand.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 1.2.2 Keypad The BHT key functions can be set at user programs. The diagram below shows an example of settings for each key function. 27-Keypad (1) (2) (3) (6) (7) (4) (5) (9) (10) (8) (11) (12) (13) (16) (14) (15) (17) (18) No. Key Name (1) Power key Turns the BHT power ON and OFF. (2) Tab key Used to enter a tab character.
Barcode Handy Terminal No. Key Name Function and Description (8) Function keys (9) Scan key (10) Cursor keys Used to move the cursor and select menus. (11) Escape keys Cancels the operation. (12) Backspace key Moves back one character. (13) Shift key (14) (15) Function mode key Alphabetical mode key Used to select functions. Press to scan barcodes. (This key performs the same function as a Trigger switch.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 42-Keypad (1) (2) (3) (6) (7) (4) (5) (9) (10) (8) (11) (17) (18) (12) (13) (16) (15) (14) No. Key Name (1) Power key Turns the BHT power ON and OFF. (2) Tab key Used to enter a tab character. (3) (4) M1, M2, M3 magic keys (5) 10 Function and Description • The SF and ENT key functions can be assigned to these magic keys by making settings at the SYSTEM MENU. • Character strings can be assigned at user programs.
Barcode Handy Terminal No. Key Name (8) Function keys (9) Scan key (10) Cursor keys (11) (12) (13) Alphabetical keys Function mode key Numerical mode key Function and Description Used to select functions. Press to scan barcodes. (This key performs the same function as a Trigger switch.) Used to move the cursor and select menus. Used to enter data. Switches to Function mode. Switches to numeric entry mode. (14) Backspace key Moves back one character. (15) Space key Enters a space.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 1.2.3 BHT Screen Depending on user settings and so on, the Windows desktop in the screens in this Operator’s Guide may differ a little from that in the actual BHT screen. Note: The taskbar may also be a little different from that in the actual screens. Indicates the current battery power level. Indicates the wired LAN with the CU-714 connection status. : The BHT is connected to a wired network. : The BHT is disconnected to a wired network.
Barcode Handy Terminal Indicates the software keyboard status. (Tap this icon to display/hide the software keyboard, or switch the keyboard status ON/OFF.) : Displays when ON. : Displays when OFF. Displays when the CPU switches to standby. (This icon does not dislay when standby status by default, but can be displayed by changing the setting at the System Menu or user programs.) Displays when Caps Lock is pressed at the software keyboard.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 14
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 2 BHT Preparation Describes information required by the user and procedures that must be performed prior to commencing operation. 2.1 2.2 2.3 2.4 2.5 2.6 “BHT Preparation” Procedure ·····································································16 Loading and Charging the Battery Cartridge ··············································16 2.2.1 Loading and Charging the Battery Cartridge ·················································17 2.2.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 2.1 “BHT Preparation” Procedure Follow the steps below to prepare the BHT. 2.2 Loading and Charging the Battery Cartridge(Page 16) First load and charge the battery cartridge. 2.3 Attaching the Stylus (Page 23) Attach the stylus to prevent it from being lost. 2.4 Initial Setup Calibrate the touch screen and set the calendar clock when the power is turned ON for the first time. (Page 25) 2.
Barcode Handy Terminal 2.2.1 Loading and Charging the Battery Cartridge Charging with the communication unit (CU-733, CU-714) or battery charger (CH-751) * The battery cartridge shown in the drawing is the BT-700L. • Charge batteries in temperature from 0°C to 40°C (32°F to 104°F). 1. Disconnect the hand belt. 2. Insert the battery cartridge cover (1) tabs into the BHT and load the cartridge in the direction shown by the arrow (2). 3.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 4. Connect the dedicated AC adapter to the DC input connector on the charger and plug the adapter into the wall socket. 5. The charger Power LED (green) turns ON. Place the BHT on the charger.
Barcode Handy Terminal 6. The BHT indicator LED will change to green Green LED ON when charging is complete. The LED illuminates in green when charging is complete. − Point − Charging takes approximately 3 hours (standard rechargeable battery cartridge) or 6 hours (large-capacity rechargeable battery cartridge). An only slightly discharged battery cartridge should take this time to become fully charged. The indicator LED flashing in red indicates the following causes.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Charging with the battery charger (CH-704) * The battery cartridge shown in the drawing is the BT-700LL. • Charge batteries in temperature from 0°C to 40°C (32°F to 104°F). 1. Check the battery cartridge terminals and insert the cartridge. 2. Connect the power cable to the CH-704 and connect the plug to a commercial AC power source (100 V AC). 3. The red LED flashes slowly (1 second ON, 1 second OFF) when charging is complete.
Barcode Handy Terminal 5. Insert the battery cartridge cover (1) tabs into the BHT and load the cartridge in the direction shown by the arrow (2). 6. Slide the battery cartridge cover release buttons (1)/(2) in the direction shown by the arrows and return the hand belt (3) to its original position. − Note − The BHT is equipped with a back-up battery used to back-up the internal memory and calender clock. The internal back-up battery is charged first a charged battery cartridge is inserted.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Mishandling of the charger may result in charger overheating, smoke generation, blowout or combustion. Please read the following items prior to use. Never disassemble or modify the battery cartridge. Never connect the battery cartridge (+) and (-) terminals with a metal object such as a piece of wire. Never carry or store the battery cartridge together with metallic necklaces, hairpins and so on. Never expose the battery cartridge to fire or apply heat.
Barcode Handy Terminal 2.2.2 Battery Power Level Indicator The battery power level can be checked at the taskbar. The battery power displays in three levels. icon that displays in the The battery power level indicator is a guideline to notify the operator to charge the battery promptly when discharged. : Sufficient battery power remains. : The battery power is partially depleted. Charge promptly. : The battery power is almost fully depleted and should be charged immediately.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 2.3 Attaching the Stylus Attach the stylus to prevent it from being lost. 2.3.1 Attaching the Stylus Attach the stylus as shown below. 27-Keypad 42-Keypad 2.3.2 Holding the BHT Insert your hand into the hand belt and hold the BHT as shown below.
Barcode Handy Terminal 2.3.3 Using the Stylus The BHT liquid crystal display (LCD) is a touch screen. Buttons, menus and so displayed on the screen can be selected using the stylus provided. Always perform touch screen calibration before operating the touch screen. (Refer to “2.4 Initial Setup”.) 2.3.4 Touch Screen Operation Select the LCD touch screen buttons and menus and so on using the stylus provided. Action Description Tap This involves tapping the touch screen once.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 2.4 Initial Setup It is necessary to perform touch screen calibration and set the date and time when turning ON the BHT power for the first time. Press the power key to turn ON the BHT power. The calibration screen should then display. If the calibration screen does not display, first perform a “full reset”. Refer to “2.6 Resetting and Full Resetting” for details of the full reset method. 1. Press the power key to turn ON the BHT power.
Barcode Handy Terminal 2.5 Turning OFF the Power Use one of the following three methods to turn OFF the BHT power. Normal power OFF Turning the power OFF after registry back-up Auto power OFF → Press the power key. → Hold down the SF key and press the power key for 3 seconds or more. → The power turns OFF automatically when the BHT is not used for a set length of time. 2.5.1 Normal Power OFF 1. Press the power key. The BHT power turns OFF after the screen on the right displays.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 2.5.3 Auto Power OFF The power turns OFF automatically when the BHT is not used for the length of time set at the user program. The default time is set to 3 minutes when the BHT is shipped from the factory. − Point − Do not remove the battery cartridge while Auto Power OFF is processing. Failure to observe this may result in data stored in the BHT being lost. * Refer to “Chapter 4 System Operation” for details of auto power OFF.
Barcode Handy Terminal 2.6 Resetting and Full Resetting 2.6.1 Reset Reset the BHT in the following cases. • The BHT makes no response to entry from the touch screen or keys. • Programs in the BHT malfunction for some unknown reason. 2.6.2 Reset Method 1. With the BHT power ON, press the reset button on the rear of the BHT with the stylus provided. Stylus − Point − Data stored as a file will not be lost even after resetting. However, any data currently being edited will be lost. Reset button 2.6.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 2.6.5 Memory Contents after Reset/Full Reset Reset Full Reset Data in the “FLASH” folder Data retained Data retained Data in other folders Data retained Data erased Contents of the Registry Data retained Data erased Data being edited Data erased Data erased (Note) (Note) If the Registry has been backed up (Refer to “2.5 Turning OFF the Power”.), the backed up Registry will be used. 2.6.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 3 Basic Operation This chapter describes how to scan barcodes using the BHT, the backlight function, how to use the keypad, and BHT data transmission. 3.1 3.2 3.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 3.1 Scanning Barcodes Follow the procedure below to scan barcodes. 1. Turn the BHT power ON. Power key 2. Bring the barcode reading window to a barcode to be scanned, and press the trigger switch. 3. The BHT turns on the illumination LED to scan the barcode. Barcodes can be read also by pressing the Scan key. When the BHT has read the barcode successfully, the indicator LED will illuminate in blue.
Barcode Handy Terminal − Note − By using the “KbifCE” utility software, codes read by the BHT can be converted into keypad data to be transmitted to an application program. The utility software can be downloaded from the DENSO WAVE Web site (http://www.denso-wave.com/). For further details, refer to the “2D Code Scanner/Barcode Scanner Keyboard Interface with BHT-CE kbifCE User's Guide“ provided with the software.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 3.2 Turning ON/OFF the Backlight 27-Keypad To turn the backlight ON or OFF, hold down the SF key and press the M3 magic key. Backlight OFF or dim (backlight function disabled) Hold down the SF key and press the M3 magic key. Backlight ON M3 magic key Hold down the SF key and press the M3 magic key. If no key is pressed for 3 seconds.* Press any key (except for the simultaneous depression of the M3 magic key and SF key) or tap the touch screen.
Barcode Handy Terminal 42-Keypad To turn the backlight ON or OFF, hold down the SF key and press the M3 magic key. Backlight OFF or dim (backlight function disabled) Hold down the SF key and press the M3 magic key. Backlight ON M3 magic key Hold down the SF key and press the M3 magic key. If no key is pressed for 3 seconds.* Press any key (except for the simultaneous depression of the M3 magic key and SF key) or tap the touch screen.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 3.3 Using the Keypad 3.3.1 Entering Numerical Data 27-Keypad The default setting is numeric entry mode, enabling numbers written on the left of the top of numeric keys to be entered. To enter “120” for example, press the “1”, “2” and “0” keys sequentially. If the wrong number is incorrectly entered, press the BS key to delete the number and then reenter the correct number. 42-Keypad Press the NUM key to switch to numeric entry mode.
Barcode Handy Terminal 3.3.3 Entering Data using shift status Press the [SF] key to switch to the shift status which enables the purple character keys. For example, while holding down the [SF] key, pressing the purple [2] key enters the “@”. There are two [SF] key modes –-“Nonlock mode” and “Onetime mode”. “Nonlock mode” enables the shift status only while the [SF] key is held down.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 3.4 Transmitting Data Data gathered by the BHT can be transmitted to the host computer by connector communication, infrared communication, Bluetooth® communication, wireless communication* or GPRS and EDGE communication**. The data transmission method and BHT setting method will differ depending on the system used, and therefore the system administrator should be contacted for details of operation.
Barcode Handy Terminal 3.4.1 Connector Communication Depending on the computer interface to which the BHT is being connected, or the communcation unit used, the user can choose between an RS-232C, USB or Ethernet connection. Place the BHT on the communication unit (CU-733, CU-714) and transmit data. CU-733: RS232C or USB CU-714: Ethernet Requests Handling the CU-714 • A Category 5 (Cat 5) LAN cable or higher is required when using the CU-714 in 100BASE-TX networks.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 3.4.2 Infrared Communication When performing data communication between BHT units Point the BHT infrared communication ports toward each other and perform communication. Requests • Ensure that the light path between the BHT and any target stations is not obstructed. • Perform communication within the effective infrared emission range (15 cm). • Do not operate remote control units for televisions and so forth in the vicinity of infrared communication.
Barcode Handy Terminal 3.4.3 Bluetooth® Communication This interface permits wireless communications with other Bluetooth®-enabled devices. Bluetooth® communication ® Bluetooth -enabled devices The BHT supports the following profiles: - DUN-DT Profile - Generic Access Profile - Serial-DevA Profile - Serial-DevB Profile - Service Discovery Profile Requests Pointing the BHT in the direction of the other device sometimes improves communications over the link.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 3.4.4 Wireless Communication * BHT-700BWB-CE/700BWBG-CE only Transmit data to host computer via the wireless LAN access point. To perform wireless communication, it is necessary to configure the wireless local area network (wireless LAN) at the BHT and access point. Wireless communication Wireless LAN access point Requests • Point the antenna on top of the BHT toward the access point to improve communication performance.
Barcode Handy Terminal 3.4.5 GPRS and EDGE Communication * BHT-700BWBG-CE only The BHT can perform packet data communication using GSM system mobile phone networks via a wireless base station. It is necessary to establish a contract with a service provider and acquire a SIM card in order to perform packet data communication. GPRS and EDGE communication Wireless base station Requests If the EDGE(GPRS) module of BHT-700BWBG-CE model is on, the function of voice recognition may be deteriorated.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 44
BHT-700BB-CE/700BWB-CE/700BWB-CE Chapter 4 System Operation This chapter describes how to operate the desktop, Start menu and System Menu, and how to make wireless network settings. 4.1 4.2 4.3 Desktop ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・46 Start Menu ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・49 System Menu Outline ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・59 4.3.1 System Menu Structure ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 60 4.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 4.1 Desktop The desktop displays when initial setup (See “Chapter 2 BHT Preparation” – “2.4 Initial Setup”.) is complete. All programs can be started up by double-tapping their respective icons on the desktop. My Device Double-tap the “My Device” icon on the desktop to display the screen on the right. This program can be used to browse file information and so on in the BHT. Recycle Bin Double-tap the “Recycle Bin” icon on the desktop to display the screen on the right.
Barcode Handy Terminal BhtShell Double-tap the “BhtShell” shortcut icon on the desktop to display the screen on the right. Refer to “4.4 System Menu Details” for further details on this program. Internet Explorer Double-tap the “Internet Explorer” icon on the desktop to display the screen on the right (example). This program can be used to browse Web pages. − Note − It is necessary to make wireless settings and open the wireless device before running Internet Explorer. Refer to “4.4.
BHT-700BB-CE/700BWB-CE/700BWBG-CE − Note − Configuring the Proxy Server Select [View(V)] – [Internet Options(O)] from the Internet Explorer menu to display the “Internet Options” screen. Tap the “Connection” tabbed page to display the screen on the right and then make the Internet connection settings. Remote Desktop Connection Double-tap the “Remote Desktop Connection” icon on the desktop to display the screen on the right. This program can be used to remotely operate the desktop on other computers.
Barcode Handy Terminal 4.2 Start Menu Tap the button in the bottom left corner of the desktop to display the screen on the right. This menu can be used to run programs and make system settings. kbifCE From the Start menu, tap [Programs(P)] – [kbifCE] - [kbifCE] to display the icon shown in the task bar in the screen on the right and permanently enable the “kbifCE” keyboard interface shift.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Windows Explorer From the Start menu, tap [Programs(P)] – [Windows Explorer] to run Windows Explorer. Refer to “4.1 Desktop” – “My Device” for further details. Command Prompt From the Start menu, tap [Programs(P)] – [Command Prompt] to display the screen on the right. Remote Desktop Connection From the Start menu, tap [Programs(P)] – [Remote Desktop Connection] to run Remote Desktop Connection. Refer to “4.1 Desktop” – “Remote Desktop Connection” for further details.
Barcode Handy Terminal Control Panel From the Start menu, tap [Settings(S)] – [Control Panel(C)] to display the screen on the right. The Control Panel can be used to configure the basic Windows operating environment. Backlight Double-tap the “Backlight” icon at the Control Panel to display the “Backlight” screen. Tap the “General” tabbed page at the “Backlight” menu to display the screen on the right. Backlight (*1) Set whether to turn ON the backlight when keys are pressed or the screen tapped.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Tap the “LCD/Keypad” tabbed page at the “Backlight” menu to display the screen on the right. LCD Backlight ON Level Select the brightness from one of the following four levels. (Dark) Off Low Bright Mid Bright High Bright (Bright) Power Save Level Change the settings for turning OFF the backlight after no keys have been pressed or the screen tapped for a specified period of time. Dim: OFF: Dim (Backlight remains ON faintly.) Backlight turns OFF.
Barcode Handy Terminal PC Connection Properties Double-tap the “PC Connection” icon at the Control Panel to display the screen on the right. This menu can be used to the connection method to the computer. Tap the [Change Connection…] button to set the connection method. System Properties Double-tap the “System” icon at the Control Panel to display the “System Properties” screen. Tap the System Properties “General” tabbed page to display the screen on the right.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Stylus Properties Double-tap the “Stylus” icon at the Control Panel to display the “Stylus Properties” screen. The double-tap speed can be adjusted at this screen. Tap the “Calibration” tabbed page to display the screen on the right. Tap the [Recalibrate] button to perform touch screen calibration. Follow the instructions displayed on the screen. Refer to “Chapter 2 BHT Preparation” – “2.4 Initial Setup” for further details.
Barcode Handy Terminal Dialing Properties Double-tap the “Dialing” icon at the Control Panel to display the “Dialing Properties” screen. Telephone line settings can be made at this screen. Network and Dial-up Connection Properties Double-tap the “Network and Dial-up Connection” icon at the Control Panel to display the screen on the right. Double-tap the “Make New Connection” icon and set the connection name and type in accordance with the instructions given in the wizard that starts up.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Display Properties Double-tap the “Display” icon at the Control Panel to display the “Display Properties” screen. Tap the “Background” tabbed page to display the screen on the right. The wallpaper displayed on the desktop can be set at this screen. Tap the “Appearance” tabbed page to display the screen on the right. The desktop appearance can be set at this screen. Owner Properties Double-tap the “Owner” icon at the Control Panel to display the “Owner Properties” screen.
Barcode Handy Terminal Regional and Language Settings Properties Double-tap the “Regional and Language Settings” icon at the Control Panel to display the “Regional and Language Settings Properties” screen. The display method for the following items can be set at this screen. • Region • Values • Currency • Time • Date Date/Time Properties Double-tap the “Date/Time” icon at the Control Panel to display the “Date/Time Settings Properties” screen. The date, time and time zone can be set at this screen.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Network and Dial-up Connection From the Start menu, tap [Settings(S)] – [Network & Dial-up Connection(N)] to display the “Network & Dial-up Connection” screen. Refer to “4.2 Start Menu” – “Control Panel” for further details. Task Bar and Start Menu From the Start menu, tap [Settings(S)] – [Taskbar and Start Menu(T)] to display the “Taskbar and Start Menu” screen. Tap the “General” tabbed page to display the screen on the right. The taskbar can be customized at this screen.
Barcode Handy Terminal 4.3 System Menu Outline Double-tap the “BhtShell” icon on the desktop to display the “System Menu” screen on the right. To run items in the System Menu, tap the relevant item or press the corresponding numerical key. or button located in the top right corner of To exit the System Menu, tap the the screen. The keys below are so designed that the function of each key is consistent in every screen. Numerical keys Runs the item corresponding to the number displayed on the screen.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 4.3.1 System Menu Structure Double-tap the “BhtShell” shortcut icon on the desktop to start up the System Menu. Executes selected applications. (Refer to “4.4.1 Execute Program Menu” for further details.) Menu [1] ESC key Performs communication with the host computer. (Refer to “4.4.2 Communication Menu” for further details.) Menu [2] ESC key Sets various environmental conditions. (Refer to “4.4.
Barcode Handy Terminal Tests various hardware operations. (Refer to “4.4.4 HardTest Menu” for further details.) Menu [4] ESC key Runs Explorer. (Refer to “4.4.5 Explorer” for further details.) Menu [5] Displays system information. (Refer to “4.4.6 System Information” for further details.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Detailed Description of the Functions in System Menu Hold down the SF key and press the corresponding numerical key. Sets various environmental conditions. (Refer to “4.4.3 System Properties” for further details.) Resets the memory back-up power source discharge count. SF + 0 key Sets whether to switch to ActiveSync auto connection.
Barcode Handy Terminal 4.4 System Menu Details 4.4.1 Execute Program Menu Applications and so on can be started up at this menu. 1. 2. Tap “1: Execute Program” at the System Menu to display the screen on the right. Tap the [Browse…] button to display the screen on the right. Select the file to be started up or enter a file name. Check that the name of the file to be started up displays in the “Name:” field and tap the [OK] button. 3.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 4.4.2 Communication Menu Tap “2: Communication” at the System Menu to display the screen on the right. [1] Ymodem: [2] ActiveSync(Infrared): [3] ActiveSync(USB): [4] ActiveSync(RF): [5] ActiveSync(LAN): [1] Communicates with the host computer using the Ymodem. Communicates with the host computer via IrDA using ActiveSync. Communicates with the host computer via USB using ActiveSync. Communicates with the host computer by wireless using ActiveSync.
Barcode Handy Terminal IrDA Interface Settings To perform communication with the host computer via the IrDA interface port, specify “IrDA(COM4:)” for “Port”. The screen on the right displays. Specify the same setting as that at the host computer for “BaudRate”. All other data values are fixed at the values below. “Databit” : 8 “Parity” : None “StopBits” : 1 The communication environment settings following BHT initialization are as follows.
BHT-700BB-CE/700BWB-CE/700BWBG-CE If an error occurs while downloading… If an error occurs while downloading, the beeper sounds three times and one of the following screens displays. ν Problem There is insufficient memory to store downloaded files. ν Solution Delete any unnecessary files or reduce the size of the file being downloaded. ν Problem The path of the file being downloaded is too long. ν Solution Change the file name of the file being downloaded or change the download destination folder.
Barcode Handy Terminal ν Problem Downloading has failed due to a communication error. ν Solution Check the communication environment settings and then try again. The communication parameters at the host computer should also be checked. ν Problem Downloading has been aborted. ν Solution Check the communication environment settings and communication log and then try again. The communication parameters at the host computer should also be checked. ν Problem The communication port has already been opened.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Uploading 1. Specify the file to be uploaded and tap button (3) to begin uploading. File to be uploaded 2. Uploading is now complete. The beeper sounds once (long beep) and the screen on the right displays. If an error occurs during uploading… If an error occurs while uploading, the beeper sounds three times and one of the following screens displays. ν Problem The file being uploaded is currently open. ν Solution Close the file and try again.
Barcode Handy Terminal ν Problem Uploading has been aborted. ν Solution Check the communication environment settings and communication log and then try again. The communication parameters at the host computer should also be checked. ν Problem The communication port has already been opened. ν Solution Close the communication port already opened for other processing and then try again. ν Problem A timeout has occurred.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [2] ActiveSync(Infrared) Tap “2:ActiveSync(Infrared)” at the Communication menu to connect to the host computer via the IrDA interface port. The screen on the right displays when a connection has been established. Refer to “Chapter 5 Communication” – “5.6 ActiveSync” for further details on configuration of the host computer and connection using ActiveSync.
Barcode Handy Terminal [3] ActiveSync(USB) Tap “3:ActiveSync(USB)” at the Communication menu to connect to the host computer via USB using the connector interface port. The screen on the right displays when a connection has been established. Refer to “Chapter 5 Communication” – “5.6 ActiveSync” for further details on configuration of the host computer and connection using ActiveSync.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [4] ActiveSync(RF) Tap “4:ActiveSync(RF)” at the Communication menu to connect to the host computer by wireless communication. − Point − Before running “ActiveSync(RF)”, it is necessary to set up a partnership between the host computer and BHT by running "ActiveSync (Infrared)" or "ActiveSync (USB)". It will not be possible to run “ActiveSync(RF)” if the wireless settings are incorrect. Refer to “4.4.3 System Properties” – “[8] Radio Frequency Menu (NIC Control)”, or “4.
Barcode Handy Terminal 3. The screen on the right displays when connection is complete. If connection to the network fails… If connection to the network fails, a warning beeper sounds three times, and the screen on the right displays. ν Solution The wireless settings may be incorrect. Refer to “4.4.3 System Properties” – “[8] Radio Frequency Menu (NIC Control)”, or “4.5 Wireless Network Settings” and then make the wireless settings.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [5] ActiveSync(LAN) Tap “5:ActiveSync(LAN)” at the Communication menu to connect to the host computer by CU-714 communication. − Point − Before running "ActiveSync(LAN)", it is necessary to set up a partnership between the host computer and BHT by running "ActiveSync (Infrared)" or "ActiveSync (USB)". Before running "ActiveSync(LAN)", it is necessary to set BHT on CU-714. ActiveSync(LAN) cannot be used with ActiveSync 4.X. Use ActiveSync 3.8 or earlier version. 1. 2.
Barcode Handy Terminal 4.4.3 System Properties Tap “3:System Properties” at the System Menu to display the screen on the right. [1] Barcode: [2] Beeper/Vibration: [3] Control Panel: [4] File System: [5] Power Management: [6] Key: [7] Status Display: [8] Radio Frequency: [9] Bluetooth: [1] Opens the Barcode menu. Opens the Beeper/Vibration menu. Opens the Control Panel. Opens the File System menu. Opens the Power Management menu. Opens the Key menu. Opens the Status Display menu. Opens the NIC Control menu.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [2] Beeper/Vibration Double-tap “Beeper/Vibration” at the System Properties screen to display the screen on the right. This menu is used to adjust the beeper volume and switch between the beeper and vibrator. Adjusting the Beeper Volume Sets the beeper volume for each operation. Beeper: Key clicks: Screen taps Trigger key clicks*: Select the beeper volume from 0 (low) to 5 (high). (Default: 5) Select the beeper volume when a key is pressed.
Barcode Handy Terminal [3] Control Panel Double-tap “Control Panel” at the System Properties screen to display the screen on the right. The basic Windows operating environment can be set at the Control Panel. Refer to “4.2 Start Menu” – “Control Panel” for further details. [4] File System Double-tap “File System” at the System Properties screen to display the screen on the right. The following operations can be performed at this menu. • Memory initialization (Registry retained.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Memory Initialization (Registry Retained.) All information is initialized with the exception of Registry information and files in the FLASH folder. Initialization Procedure 1. 2. Tap the [Initialize] button. To initialize the memory, tap the [Yes] button, and to return to the previous menu, tap the [No] button. The screen on the right will display for several seconds before the system reboots.
Barcode Handy Terminal Memory Initialization (Registry Initialized.) All information, including the Registry, is initialized. However, files in the FLASH folder are not initialized. Initialization Procedure 1. Tap the “Initialize Registry” check box to select it. 2. Tap the [Initialize] button. 3. To initialize the memory, tap the [Yes] button, and to return to the previous menu, tap the [No] button. The screen on the right will display for several seconds before the system reboots.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [5] Power Management Double-tap “Power Management” at the System Properties screen to display the screen on the right. This menu is used to set the automatic power-off timer, standby timer and CPU clock speed. Automatic Power off Time: Battery Power: Sets the automatic power-off time from 0 to 32767 seconds when the BHT is not on the CU. The power does not automatically turn OFF when set to 0.
Barcode Handy Terminal [6] Key Double-tap “Key” at the System Properties screen to display the screen on the right. This menu is used to set the following keys. SF key M1 key M2 key M3 key Setting the SF Key Tap the “SHIFT” tabbed page at the Key settings menu to display the screen on the right. Nonlock: Onetime: Enables the keypad shift status only while the SF key is held down. (Default) Enables the shift status only for one key after pressing the SF key.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Assigning the M1, M2 and M3 Keys Tap the “Magic keys” tabbed page at the Key settings menu to display the screen on the right. This menu is used to assign the trigger switch, SF key, ENT key, backlight ON/OFF function and TAB key and so on (See list below.) to magic keys M1 to M3. Choice of keys available The following keys can be assigned to magic keys M1 to M3 at the respective combo boxes at the [Magic keys] tabbed pages.
Barcode Handy Terminal User-defined Code File User-defined virtual key codes can be assigned to magic keys. Enter the desired virtual key codes into a text file and save it in the BHT FLASH folder with the filename “MKeyDef.txt”. In the example on the right, “ALT+X” and “ALT+Y” is added. The user-defined code file is read when starting up the Key settings menu. The defined virtual key codes display after “CLEAR Key” in the order in which they were defined.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [7] Status Display Double-tap “Status Display” at the System Properties screen to display the screen on the right. This menu can be used to display or hide the following status indicators in the task tray.
Barcode Handy Terminal [8] Radio Frequency Menu (NIC Control) Double-tap “Radio Frequency” at the System Properties screen to display the screen on the right. This menu can be used to perform the following processes.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Displaying the IP Address and MAC Address Tap the “Network” tabbed page at the NIC Control menu to display the screen on the right. This menu displays the following information. DHCP/Static: IP Address: Subnet mask: Gateway: DNS Server: WINS Server: MAC Addr: − Note − DHCP usage/not used BHT IP address Subnet mask Default gateway DNS IP address WINS IP address BHT MAC address The MAC address displays as "00:00:00:00:00:00" when the wireless device is not opened.
Barcode Handy Terminal Setting the Wireless Options Tap the Option tab on the NIC Control menu to display the screen shown at the right. Power: Wireless module power save mode setting CAM: Always ON FastPSP: Power save mode (Default) − Note − When using the BHT with PSP mode set, set a low value (2 or 3) for DTIM at the access point. It may not be possible to reconnect to the access point if a larger value is set. Radio mode:Radio mode setting 11b: Enable 802.11b connection 11b/g: Enable 802.11b or 802.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Displaying the Current Communication Status Tap the “Link” tabbed page at the NIC Control menu to display the screen on the right, at which the current communication status displays in real time. Associated Access Point: Displays the MAC address assigned to the wireless interface of the associated access point. Signal Strength: Displays the receipt packet signal intensity. Link Quality: Displays the overall communication link quality with the access point.
Barcode Handy Terminal Performing a Ping test Tap the “Ping” tabbed page at the NIC Control menu to display the screen on the right. Dest IP: Data size: Interval: Timeout: Type1 or Type2: Count: Specifies the IP address of the host computer to be pinged. Specifies the data size of the echo request. Specifies the length of echo request intervals (in 100 ms units). Specifies the timeout period (in 100ms units) for the echo request. Specifies the echo request transmission timing (described on next page).
BHT-700BB-CE/700BWB-CE/700BWBG-CE Ping echo request transmission timing Two types of echo request transmission timing are available: Type 1 and Type 2. (Default: Type 2) Type1 After sending an echo request, the next Ping echo request is sent after the interval time has elapsed. In such a case, set the Interval and Timeout so that “Interval ≥ Timeout”.
Barcode Handy Terminal [9] Bluetooth® Properties Double-tap the "Bluetooth", and the Bluetooth® property appears. Info: Device Addr: System Ver: Firmware Ver: Displaying the MAC address of Bluetooth® module Bluetooth® system version Firmware version of the Bluetooth® module Power Control: Power On: Enables Bluetooth® communication. Power Off: Disables Bluetooth® communication.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [12] Power key Select the device for notification of pressing power key to turn BHT power ON. Following combinations are possible for notification. LED: Blue LED Beeper: Beeper Vibration: Vibrator − Note − [13] No device is set by default. GPRS Sets whether GPRS is turned OFF or not when the BHT is turned power OFF. Set check box and tap the [OK] button to turn OFF GPRS. Available operating time is degraded if GPRS power is kept to be turned ON.
Barcode Handy Terminal 4.4.4 HardTest Menu Tap “4:Test” at the System Menu to display the screen on the right. [1] BARCODE: [2] BEEPER: [3] AGING: [4] COM: [5] DISPLAY: [6] KEY VIBRATION: − Note − [1] Performs a barcode scanning test. Performs a beeper scale test. Performs an aging test. Performs a communication (IrDA/USB) test. Performs an LCD and indicator LED test. Performs a key entry and vibrator test. Contact your sales dealer if an error occurs during any of the above tests.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [2] Beeper Scale Test Tap “2:BEEPER” at the HardTest menu to display the screen on the right and sound the beeper at the two octaves listed below. The BHT automatically returns to the HardTest menu upon completion of the test.
Barcode Handy Terminal IrDA Interface Test Prepare two BHTs, one as a master station and the other as a slave station (for testing) with their IR ports facing each other as illustrated below. In this test, the slave BHT transmits data to the master BHT and receives the data returned from the master BHT. Data 0.15 m or less Master Slave (for testing) Tap “1:OPTICAL” at the COM menu to display the SLAVE/MASTER selection screen on the right.
BHT-700BB-CE/700BWB-CE/700BWBG-CE If an error occurs during the IrDA interface test… If the test is aborted due to a timeout error, a warning beeper sounds three times and the screen on the right displays at the BHT being tested (slave). In this example screen, an error occurred at a communication speed of 2400 bps. If the test is aborted due to a mismatch between the sent and received data, a warning beeper sounds three times and the screen on the right displays at the BHT being tested (slave).
Barcode Handy Terminal If ActiveSync connection via the USB interface port is successful… If ActiveSync connection is successful, the beeper sounds once and the ActiveSync icon displays in the task tray (circled in red on right). If ActiveSync connection via the USB interface port fails… If ActiveSync connection fails, the ActiveSync icon does not display.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [5] LCD and LED Indicator Test Tap “5:DISPLAY” at the HardTest menu to display the black test screen on the right and illuminate the indicator in blue. Press the ENT key to proceed to the next test pattern. Press the BS key to return to the previous test pattern. As shown on the right, the screen turns blank and the indicator LED turns red.
Barcode Handy Terminal A gray screen displays with a one-dot wide white outline. BS key ⇑ ⇓ ENT key BS key ⇑ ⇓ ENT key Forty eight right-angled triangles display. A gradation pattern displays filling the entire screen. Press the ENT key to return to the HardTest menu.
BHT-700BB-CE/700BWB-CE/700BWBG-CE [6] Key Entry and Vibrator Test Tap “6:KEY VIBRATION” at the HardTest menu to display the screen on the right awaiting key entry. Press individual keys to display characters at pre-assigned positions on the screen. The relationship between the keys and displayed characters is shown in the table below. 27-Keypad Key TAB M1* M2* M3 F1 F2 F3 F4 ^ v > < Character Key Character Key Character TAB M1 M2 M3 F1 F2 F3 F4 ^ v > < 1 2 3 4 5 6 7 8 9 0 . 1 2 3 4 5 6 7 8 9 0 .
Barcode Handy Terminal 42-Keypad Key TAB M1* M2* M3 F1 F2 F3 F4 ^ v < > Character Key Character Key Character TAB M1 M2 M3 F1 F2 F3 F4 ^ v < > A B C D E F G H I J K L M N O P Q R A B C D E F G H I J K L M N O P Q R S T U V W X Y Z S T U V W X Y Z NUM ENT ESC SF BS SP FN SCAN** NUM ENT ESC SF BS SP FUNC SCANX * The vibrator only works when the M1 or M2 key is pressed. ** Pressing the right or left trigger switch has the same function as pressing the SCAN key.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 4.4.5 Explorer Tap “5:Explorer” at the System Menu to display the screen on the right. 4.4.6 System Information Tap “6:Version” at the System Menu to display the screen on the right.
Barcode Handy Terminal 4.5 Wireless Network Settings 4.5.1 Editing in Windows Zero Config The screen on the right displays when booting up the BHT for the first time or when wireless network environment settings have not been made. If this screen does not display, it can be displayed by double-tapping the Wireless Zero Configuration status icon in the task tray. This menu can be used to perform the following processes.
BHT-700BB-CE/700BWB-CE/700BWBG-CE IP Information Tap the “IP Information” tabbed page at the wireless network settings menu to display the screen on the right. This menu displays network settings information such as the current IP address. When the IP address is set to be obtained from the DHCP server, tap the [Renew] button to reacquire the IP address. When the IP address is set to be specified by the user, information is not updated even when the [Renew] button is tapped.
Barcode Handy Terminal Wireless Information Wireless Properties Tap the “Wireless Information” tabbed page at the wireless network settings menu to display the screen on the right. The SSID list for which a search was performed automatically by the BHT displays. If the SSID is not automatically recognized, double-tap “Add New…” and manually enter the SSID. Tap the SSID for which a connection is to be made from the SSID list, and then tap the [Connect] button to begin connecting to the wireless network.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Security and Setting Method The security level can be changed based on the encryption and authentication combination. The setting parameters for each security level are shown in the table below. Security Parameter Encryption PEAP EAP-TLS PEAP EAP-TLS PSK PEAP EAP-TLS PSK (802.1x) (802.
Barcode Handy Terminal The [Select..] button is enabled when TLS is selected for the “EAP type”. Tap the [Select..] button to display the screen on the right showing the certificate list. Select a certificate from the list and tap the [View Certificate…] button to display detailed information. Advanced Wireless Settings Tap the [Advanced…] button at the “Wireless Information” tabbed page to display the screen on the right.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 4.5.2 Editing in RF Control If Controller is set to RF Control (BHT-own control), make wireless network settings on the Profiles page (shown at the right) which is called up by tapping the Profiles tab on the Radio Frequency menu screen. This page provides the following buttons. • • • • • • • • Button New... Edit... Delete Up Down Cert... Apply Reset Use to Create a new profile. Edit the selected profile. Delete the selected profile.
Barcode Handy Terminal Tapping the Properties button displays the screen shown at the right. User ID Enter the user ID. Password Enter the password. Phase1 User ID Not available. Issued to This field shows the destination of the specified client certificate. Issued by This field shows the source of the specified client certificate. Validate Server If this check box is selected, the BHT verifies the server certificate using the root certificate previously imported. Tapping the Select...
BHT-700BB-CE/700BWB-CE/700BWBG-CE Configuring Security Security can be configured with the combination of the encryption and authentication settings as listed below. Security Parameter None PEAP PEAP (802.1x) EAP-TLS (802.1x) LEAP (802.1x) (WPA) EAP-TLS (WPA) LEAP (WPA) PSK (WPA) Open Open WPA WPA WPA WPAPSK WEP TKIP TKIP TKIP TKIP LEAP Disable Authentication None Open Open Encryption Open WEP WEP WEP LEAP PEAP EAPTLS 802.
Barcode Handy Terminal [2] Cert (Certificate) Some EAP types require certificates as listed below. Root certificate Client certificate (incl. secret key) PEAP √ (omissible) – EAP-TLS √ (omissible) √ – – EAP type LEAP The certificates and secret key supported and their formats are as shown below. File Root certificate Format X.509 DER format Client certificate Secret key PKCS#1 DER format On the Profiles page, tapping the Cert... button displays the screen shown at the right.
BHT-700BB-CE/700BWB-CE/700BWBG-CE (1) Import... To import a root certificate On the Certificates screen, select Trusted Authorities from the pull-down list box and then tap the Import... button to display the screen shown at the right. Certificate Specify a full path to the root certificate file to be imported. Friendly Name Specify a friendly name.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 5 Communication This chapter describes technical information on BHT connector communication, infrared communication, Bluetooth® Communication and wireless communication, and provides details of Microsoft ActiveSync. 5.1 5.2 5.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 5.1 Connector Communication The BHT-700BB-CE/700BWB-CE/700BWBG-CE is equipped with a connector interface used to communicate with other devices. Use the CU-733 or CU-714 to perform communication.
Barcode Handy Terminal 5.2 Infrared Communication The BHT has a built-in infrared (IR) communication device that enables wireless transfer of programs and data both between the BHT and the host computer and between BHTs without the need for a cable. Infrared communication offers the following benefits over other forms of communication.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 5.3 Bluetooth® Communication 5.3.1 Notes for Bluetooth® Operations The BHT supports Bluetooth® wireless data transmission. • If there are too many communications errors, first make sure that the BHT points directly at other Bluetooth®-enabled devices because the 2.4 GHz band requires a more or less straight line path. Note also that the low-power radio waves have trouble passing through human bodies and other obstacles along that path.
Barcode Handy Terminal 5.3.2 Specifying Parameters Bluetooth® device address Remote devices return these addresses, uniquely assigned to each Bluetooth® device by the Bluetooth® SIG, during device detection. Bluetooth® device name Bluetooth® devices can distinguish themselves using user-friendly names--Robert or Sandra, for example. Bluetooth® passkey (Bluetooth® PIN) Pairs of Bluetooth® devices use these encryption keys for mutual authentication and for establishing secure links between themselves.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 5.4 Wireless Communication The BHT-700BWB-CE/700BWBG-CE is equipped with a 2.4/5 GHz waveband wireless module. 5.4.1 Usage Precautions • It may be possible to avoid the easy occurrence of communication errors by pointing the right side of the BHT (equipped with built-in antenna) toward the access point. This is because the radio waves of the 2.4/5 GHz waveband on which the BHT operates are emitted straight ahead and do not easily pass through the human body and so on.
Barcode Handy Terminal 5.5 Basic Communication Specifications and Ymodem Communication 5.5.1 Basic Communication Specifications The table below lists communication specifications when the BHT exchanges data with the host computer using the IrDA interface or connector interface.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Transmission Code and Bit Order • All characters should be coded to 7 or 8-bit code for data transmission. • The standard code at the BHT is ASCII 7-bit or 8-bit code. • The transmission bit order is LSB (Least significant bit) first. The example below is for the transmission of an ASCII 8-bit code A (41h or 01000001b, b: binary) with even vertical parity and a single bit each for the start and stop bits.
Barcode Handy Terminal 5.5.2 Ymodem Communication At the System Menu and in user programs, the BHT can perform Ymodem communication with the following communication parameters.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 5.6 ActiveSync ActiveSync allows the BHT to connect to the host computer and perform the following operations. • Data synchronization • Data back-up • Data copy or transfer • User program debugging Any of the following four methods can be used to connect the BHT and host computer. • IrDA communication • Connector communication (USB) • Wireless communication • CU-714 communication 5.6.1 ActiveSync 4.
Barcode Handy Terminal 5.6.2 Connecting with ActiveSync IrDA Communication Arrange the BHT and host computer with their IrDA interface ports facing one another as shown below. BHT Host computer IrDA communication Refer to “Chapter 4 System Operation” – “4.4.2 Communication Menu” for details of how to run ActiveSync at the BHT. Connector Communication Connect the host computer USB interface port to the BHT connector interface port with a CU-733.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 5.6.3 Setting Up a Partnership 1. The screen on the right displays at the host computer once a connection has been established with the BHT. Set up the partnership between the host computer and BHT. Select the “Yes” option and click the [Next >] button. 2. The screen on the right displays. To synchronize files, select the “Files” check box and click the [Next >] button. 3. Click the [Finish] button to complete the setup and return to Windows.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 6 Maintenance This chapter describes battery cartridge and daily procedures for taking care of the BHT and CU/CH. 6.1 Replacing the Battery Cartridge································································126 6.1.1 Battery Cartridge Service Life ······································································126 6.1.2 Battery Cartridge Replacement Method ······················································126 6.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 6.1 Replacing the Battery Cartridge 6.1.1 Battery Cartridge Service Life The battery cartridge is a consumable part and should be replaced after being charged approximately 300 times. The performance of the battery cartridge’s lithium-ion battery will deteriorate gradually with repeated charging, even during normal use. When the battery operation time becomes shorter even after charging for the specified length of time, replace the battery with a new one. 6.1.
Barcode Handy Terminal 4. Slide the battery cartridge cover release buttons (1)/(2) in the direction shown by the arrows and return the hand belt (3) to its original position. Battery Cartridge Recycling Request ● This product uses a lithium-ion battery that contains scarce, recyclable resources. We kindly ask for your cooperation in recycling to ensure reuse of these resources. The crossed-out wheeled bin is applicable for EU member status only.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Mishandling may result in battery cartridge overheating, smoke generation, blowout or combustion. Please read the following items prior to use. Never charge the battery cartridge in the vicinity of fire or under a scorching sun. Always use a dedicated charger to charge the battery cartridge. Mishandling may result in battery cartridge overheating, smoke generation, blowout or combustion. Please read the following item prior to use.
Barcode Handy Terminal 6.2 Replacing the Back-up Battery If the following warning message displays, contact your dealer and replace the back-up battery. This warning message displays each time the power is turned ON after the back-up battery discharge count has reached 200 times or more. Even if this warning message displays, operation can be resumed by tapping the OK button in the top right corner of the message window.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 6.3 Using the BHT after Long Periods Data including files and settings stored in the RAM may be lost and the calendar clock may stop if the BHT is left unused for long periods of time. (Because the RAM will revert to the factory default, it is recommended that any important data be backed up to the “FLASH” folder or uploaded to the host computer. When the BHT turns ON after the data in the RAM is deleted, the BHT starts from the “Initial Setup”.
Barcode Handy Terminal 6.4 Daily Maintenance 6.4.1 Proper Care of the BHT Wipe any dirt from the BHT housing, charge terminals, and BHT or battery cartridge terminals with a dry, soft cloth. Ensure to turn OFF the BHT before cleaning. Notes in each part BHT terminal, charger terminal dirt Do not touch the BHT or the communication unit terminals by hand or stain them. Doing so could result in malfunction, a contact failure or prevent charging.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 132
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 7 Error Messages This chapter describes causes and countermeasures for error messages that display during BHT use. Refer to the BHT-700-CE API Reference Manual “Section 17.4.4 Error Codes” for the errors while the application is running. 7.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 7.1 System Errors The error messages that display on the screen and the causes and countermeasures to be taken if an error occurs when the power is turned ON or while running a program are shown below. Message 134 BHT Response Cause Countermeasure The beeper sounds 5 times (each beep lasts for 0.1 seconds) and then the power turns OFF. System program abnormality Notify the system administrator.
Barcode Handy Terminal Message BHT Response The screen on the left displays when the power is turned ON. Cause The back-up battery discharge count has exceeded the specified number of times and the battery power level has dropped below the stipulated level. Countermeasure Replace the back-up battery. Refer to “Chapter 6 Maintenance” for details.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 136
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 8 Specifications This chapter describes the BHT-700BB-CE/700BWB-CE/700BWBG-CE specifications. 8.1 Specifications ···························································································138 8.1.1 Hardware Specifications ··············································································138 8.1.2 Barcode Specifications·················································································139 8.1.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 8.1 Specifications 8.1.1 Hardware Specifications 27-Keypad Power supply (main power): Rechargeable lithium-ion battery cartridge (3.7 V DC) Dimensions (W) x (L) x (H): BHT-700BB-CE/700BWB-CE: BHT-700BWBG-CE: Weight: BHT-700BB-CE: BHT-700BWB-CE: BHT-700BWBG-CE: 83 x 162 x 27 mm 83 x 162 x 36 mm Approx. 320 g (including battery cartridge BT-700L) Approx. 330 g (including battery cartridge BT-700L) Approx.
Barcode Handy Terminal 8.1.2 Barcode Specifications Supported Barcode Types Barcode Type Bar Dimensions Scan Magnification Min. 0.26 mm Min. 0.8 Universal product codes JAN-13 (EAN-13) JAN-8 (EAN-8) UPC-A UPC-E JAN-13 (EAN-13) with add-on JAN-8 (EAN-8) with add-on UPC-A with add-on UPC-E with add-on 2-dgit add-on 5-dgit add-on Interleaved 2of5 (ITF) Standard 2of5 (STF) Codabar (NW-7) Min. 0.125 mm PCS value ≥ 0.9 Black/white bar reflection intensity difference ≥ 0.8 Min. 0.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Barcode Label Size Height (recommended): Min. 10 mm Length: Distance to barcode read window 500 mm Label length (including margin) Max. 390 mm *7 (Minimum narrow bar width: 1 mm) Length Height Thickness of Bars and Depth of Field 140 * 1 * 2 * 3 * 4 Minimum Narrow Bar Width Depth of Field 0.125 mm 0.15 mm 0.19 mm 0.25 mm 0.33 mm 0.50 mm 1.
Barcode Handy Terminal 8.1.3 Interface Specifications IrDA Interface Synchronization: Input signals: Output signals: Transmission speed: Start-stop RD SD Max. 115,200 bps Connector Interface Communication method: USB1.1, Full-speed compliant, RS-232C interface Bluetooth® Interface Specification: Bluetooth® Standard Ver. 2.0 conformity RF output: Class 2 (2.5 mW max.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 142
BHT-700BB-CE/700BWB-CE/700BWBG-CE Chapter 9 Appendices This chapter describes the CU-700 Series (option), and provides details of the MicroSD card (option) and SIM card (option) insertion procedure. 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 9.1 CU-700 Functions The CU-700 Series communication unit is available in two models: the CU-733 and CU-714. The CU-700 Series is equipped with the following functions 1) Data exchange function The CU-733/714 exchanges data and programs between the BHT and host computer.
Barcode Handy Terminal 9.2 Components and Functions CU-733 Charge LED Shows the charging state. BHT charge terminals and interface port BHT charge terminals Do not stain these terminals; doing so could result in a lower charging efficiency. Clean these terminals periodically. Interface port Used to exchange data with the BHT. Status indicators POWER LED (green) Lights when the power is applied to the CU/CH. Spare battery charge check LED (red) Illuminates while the spare battery is charging.
BHT-700BB-CE/700BWB-CE/700BWBG-CE CU-714 Charge LED Shows the charging state. Status indicators POWER LED (green) Lights when the power is applied to the CU. DATA Communications LED (green) Lights when the BHT is communicating with the host PC. BHT charge terminals and interface port BHT charge terminals Do not stain these terminals; doing so could result in a lower charging efficiency. Clean these terminals periodically. Interface port Used to exchange data with the BHT.
Barcode Handy Terminal 9.3 CU-700 Power Supply Power for the CU is supplied from a wall socket via the dedicated AC adapter. Connect the outlet plug of the AC adapter to the power inlet connector of the CU, and then plug the other end into the wall socket.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Mishandling of the CU may result in electric shock, overheating or smoke generation. Please read the following items prior to use. Never disassemble or modify the CU. Never place the CU in a microwave oven or high-pressure container. Never use the CU if smoke, abnormal noises or odors are being emitted. If any of the above abnormalities occur, immediately unplug the AC adapter.
Barcode Handy Terminal 9.4 Communicating with the Host Computer 9.4.1 Interface Cable Connection 1. Unplug the CU-733/714 AC adapter from the wall socket. 2. Turn OFF the power to the host computer. 3. CU-733: CU-714: Connect the RS-232C or USB interface cable to the CU-733 interface port. Connect the Ethernet interface cable to the CU-714 interface port. Interface cable CU-733: RS-232C or USB CU-714: Ethernet 4.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 9.4.2 Communication with the Host Computer This section describes how to communicate with the host computer from the System Menu. The same method applies when communicating using user programs. 1. Turn ON the host computer to run Windows. 2. Plug the AC adapter into the wall socket. 3. Ensure that the BHT power is turned OFF and place it on the CU. 4. At the host computer, start up a communication program capable of using Ymodem. 5.
Barcode Handy Terminal 9.5 Charging the BHT 9.5.1 Charging the BHT The battery cartridge is charged while loaded in the BHT. • Charge batteries in temperature from 0°C to 40°C (32°F to 104°F). − Note − − Note − Perform charging after turning OFF the BHT. Battery Cartridge Service Life The capacity of the lithium-ion battery used in the battery cartridge will gradually deteriorate during the repeated cycles of charging and discharging, even under normal use.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 9.5.2 Charging Operation and LED Indicators Operator Action CU Status Standby BHT Charge LED OFF ⇓ Place the BHT on the CU. ⇓ Standard rechargeable battery cartridge After approx. 3 hours Large-capacity rechargeable battery cartridge After approx. 6 hours Charging ON (red) ⇓ Charging complete ON (green) ⇓ ⇓ Remove the BHT.
Barcode Handy Terminal 9.6 CU-700 Specifications 9.6.1 Hardware Specifications CU-733 Power supply: CU-714 100/240 V AC, 50/60Hz (12 V DC: Using dedicated AC adapter) Max. power consumption: 12 V DC, 1800mA 12 V DC, 6000mA Dimensions (W) x (L) x (H): 127 x 168 x 91 mm 526 x 120 x 93 mm Approx. 290 g Approx. 1240 g Weight: Ambient operating temperature: 0 to 40° C Ambient operating humidity: 9.6.2 20 to 80% (with no dew condensation) Charging Requirements CU-733 Charge current: Approx.
BHT-700BB-CE/700BWB-CE/700BWBG-CE Function Signal Direction CU-733 ↔ External Device Pin. No. Signal Name 2 RD Receipt data ← 3 SD Transmission data → 4 ER Data terminal ready → 5 SG Signal ground — 6 DR Data set ready — 7 RS Transmission request — 8 CS Transmission ready — The input/output level for the signal voltage is shown in the table below.
Barcode Handy Terminal CU-714 The CU-714 has an IEEE802.3-compliant Ethernet interface port (100Base-TX). Ethernet Interface Port (RJ45 jack) on the CU-714 Pin No. Signal Functions 1 TD+ Send data 2 TD- Send data 3 RD+ Receive data 4 N.C. No connection 5 N.C. No connection 6 RD- Receive data 7 N.C. No connection 8 N.C. No connection The MAC address of the CU-714 is printed on the nameplate.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 9.6.4 Interface Cable Connection CU-733 RS-232C As shown in the diagram below, connect the CU-733 to the host computer with a cross-mode cable, and to the modem with a straight-mode cable.
Barcode Handy Terminal 9.7 Inserting the MicroSD Card Insert the MicroSD card (option) into the BHT using the following procedure. − Caution − Always turn the BHT power OFF before removing the MicroSD card. Failure to observe this may result in the loss of data stored in the card. 1. 2. 3. 4. 5. Remove the battery cartridge. Slide the MicroSD card cover in the (1) OPEN direction and then open the (2) MicroSD card cover.
BHT-700BB-CE/700BWB-CE/700BWBG-CE 9.8 Inserting the SIM Card Insert the SIM card (option) into the BHT using the following procedure. 1. 2. 3. Remove the battery cartridge. Slide the SIM card cover in the (1) OPEN direction and then open the (2) SIM card cover. Insert the SIM card into the slot beside the SIM cover. − Point − 4. 5. 158 Ensure that the SIM card is inserted in a direction that matches the shape of the SIM slot.
Barcode Handy Terminal 159
Barcode Handy Terminal BHT-700BB-CE BHT-700BWB-CE BHT-700BWBG-CE User’s Manual Seventh Edition, November 2010 DENSO WAVE INCORPORATED