User`s manual

93
Barcode Handy Terminal
4.4.4 HardTest Menu
Tap “4:Test” at the System Menu to display the screen on the right.
[1] BARCODE: Performs a barcode scanning test.
[2] BEEPER: Performs a beeper scale test.
[3] AGING: Performs an aging test.
[4] COM: Performs a communication (IrDA/USB) test.
[5] DISPLAY: Performs an LCD and indicator LED test.
[6] KEY VIBRATION: Performs a key entry and vibrator test.
− Note − Contact your sales dealer if an error occurs during any o
f
the above tests.
[1] Barcode Scanning Test
Tap “1:BARCODE” at the HardTest menu to display the screen on the
right.
Scan an actual barcode with the BHT and confirm that the display at the
screen matches the barcode data.
When a barcode is scanned, the indicator LED illuminates in blue,
the beeper sounds once, and the scanned barcode type,
number of digits and data display on the screen.
The relationship between the scanned barcode type and characters
displayed on the screen is shown in the table below.
Barcode Type Character
EAN-13, UPC-A
EAN-8
UPC-E
Standard 2of5 (STF)*
Interleaved 2of5 (ITF)*
A
B
C
H
I
CODABAR (NW-7)*
Code 39
Code 93
Code 128
MSI
EAN-128
RSS
N
M
L
K
P
W
R
Barcode type
No. of digits in the barcode
Barcode data
⇓
* The minimum number of digits is 3 for STF and CODABAR,
and 4 for ITF.