User`s manual

100
BHT-700BB-CE/700BWB-CE/700BWBG-CE
[6] Key Entry and Vibrator Test
Tap “6:KEY VIBRATION” at the HardTest menu to display the screen on
the right awaiting key entry.
Press individual keys to display characters at pre-assigned positions on
the screen.
The relationship between the keys and displayed characters is shown in
the table below.
27-Keypad
Key Character Key Character Key Character
TAB
M1*
M2*
M3
F1
F2
F3
F4
^
v
>
<
TAB
M1
M2
M3
F1
F2
F3
F4
^
v
>
<
1
2
3
4
5
6
7
8
9
0
.
1
2
3
4
5
6
7
8
9
0
.
AL
ENT
ESC
SF
BS
SP
FN
SCAN**
ALP
ENT
ESC
SF
BS
SP
FUNC
SCANX
* The vibrator only works when the M1 or M2 key is pressed.
** Pressing the right or left trigger switch has the same function as pressing the SCAN key. Whenever one
of these keys is pressed, the display changes from SCAN1 to SCAN2 to SCAN3. Please note that the
display will also change by pressing the same key continuously, and therefore this should be avoided.
After all keys have been pressed and their corresponding characters
displayed on the screen, the test is exited automatically and the screen
returns to the HardTest menu.