User`s manual

106
BHT-700BB-CE/700BWB-CE/700BWBG-CE
Security and Setting Method
The security level can be changed based on the encryption and authentication combination. The setting
parameters for each security level are shown in the table below.
Security
Parameter
None
PEAP
(802.1x)
EAP-TLS
(802.1x)
PEAP
(WPA)
EAP-TLS
(WPA)
PSK
(WPA)
PEAP
(WPA2)
EAP-TLS
(WPA2)
PSK
(WPA2)
Encryption
Disable
d
WEP WEP WEP TKIP TKIP TKIP AES AES AES
Authentication
– Open Open Open WPA WPA
WPA
-PSK
WPA2 WPA2
WPA2-
PSK
Network key
– xxxxxx – – – – xxxxxx – – xxxxxx
Key index
– 1 to 4 – – – – – – – –
The key is
provided
automatically
– ∗ √ √ – – – – – –
Enable
802.1X
authentication
– ∗ √ √ – – – – – –
EAP type
– – PEAP TLS PEAP TLS Ignored PEAP TLS Ignored
–： No entry possible
√： Select
∗： No entry or no selection
xxxxxx： Enter the network key.
− Note − Connect time might become long when all the following settings are filled.
(3)The Authentication setting of BHT is made WPA2 or WPA2-PSK, and the Encryption
setting is AES.
(1)The encryption setting of the access point has permitted the connection of both TKIP and
AES.
(2)The beacon of the access point doesn't notify SSID.
Authentication Settings
The [P
roperties] button is enabled when PEAP or TLS is selected for the
“EAP type”.
Tap the [P
roperties] button to display the screen on the right showing the
“User Certificate” issuance information.
Select the “Validate Server” check box to enable the certificate server.
The server is enabled by default.