User`s manual

110
BHT-700BB-CE/700BWB-CE/700BWBG-CE
Configuring Security
Security can be configured with the combination of the encryption and authentication settings as listed
below.
Security
Parameter
None
PEAP
(802.1x)
EAP-TLS
(802.1x)
LEAP
(802.1x)
PEAP
(WPA)
EAP-TLS
(WPA)
LEAP
(WPA)
PSK
(WPA)
Authentication None Open Open Open Open WPA WPA WPA
WPA-
PSK
Encryption Open WEP WEP WEP WEP TKIP TKIP TKIP TKIP
802.1x Disable Disable PEAP
EAP-
TLS
LEAP PEAP
EAP-
TLS
LEAP Disable
ESSID
Profile Priority
Key
User ID
Password
Validate Server – –
Client certificate – –
Security
Parameter
PEAP
(WPA2)
EAP-TLS
(WPA2)
LEAP
(WPA2)
PSK
(WPA2)
LEAP
(CCKM)
Authentication WPA2 WPA2 WPA2
WPA2-P
SK
CCKM
Encryption AES AES AES AES TKIP
802.1x PEAP
EAP-
TLS
LEAP Disable LEAP
ESSID
Profile Priority
Key
User ID
Password
Validate Server – –
Client certificate – –
– : Setting invalid
: Setting valid
Note Connect time might become long when all the following settings are filled.
(3)The Authentication setting of BHT is made WPA2 or WPA2-PSK, and the Encryption
setting is AES.
(1)The encryption setting of the access point has permitted the connection of both TKIP and
AES.
(2)The beacon of the access point doesn't notify SSID.