User`s manual

122
BHT-700BB-CE/700BWB-CE/700BWBG-CE
5.6 ActiveSync
ActiveSync allows the BHT to connect to the host computer and perform the following operations.
• Data synchronization
• Data back-up
• Data copy or transfer
• User program debugging
Any of the following four methods can be used to connect the BHT and host computer.
• IrDA communication
• Connector communication (USB)
• Wireless communication
• CU-714 communication
5.6.1 ActiveSync 4.5 Installation
A host computer with IrDA interface port or USB interface port is required to install ActiveSync 4.5.
− Point −  Connection with ActiveSync is not possible when using the CU-733 with RS-232C
interface.
It is necessary to perform communication with the BHT and host computer IrDA interface
ports facing one another.
 With ActiveSync 4.X, ActiveSync by wireless communication or CU-714 communication is
not possible. Use ActiveSync 3.8 or earlier version.
When establishing a connection between the BHT and host computer using ActiveSync, install
ActiveSync 4.5 on the host computer.
ActiveSync 4.5 can be downloaded free of charge from the following Microsoft Web site.
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=9e641c34-6f7f-404d-a04b-
dc09f8141141