User`s manual

130
BHT-700BB-CE/700BWB-CE/700BWBG-CE
6.3 Using the BHT after Long Periods
Data including files and settings stored in the RAM may be lost and the calendar clock may stop if the BHT is left
unused for long periods of time.
(Because the RAM will revert to the factory default, it is recommended that any important data be backed up to the
FLASH folder or uploaded to the host computer. When the BHT turns ON after the data in the RAM is deleted, the
BHT starts from the “Initial Setup”.)
Take appropriate measures in accordance with the procedure below.
Point *: Files may become corrupt if left for a long period of time without replacing
the battery cartridge.
Insert a fully charged battery cartridge.
* This is used as a memory back-up power source
and therefore should not be removed from the BH
T
for at least 2 da
y
s.
Does the normal
screen display?
The BHT can be used.
Charge promptly before
the battery becomes
fully depleted. (*)
The touch screen
calibration screen displays.
The “No system!” screen
displays.
Calibrate the touch
panel.
Refer to “Chapter 2 BH
T
Preparation” – “2.4 Initial
Setup”.
Yes
No
Yes
No
The following reasons may be
considered. Contact the system
administrator.
Hardware damage
Application failure
Power ON
Can the power be
turned ON?