User`s manual

2
BHT-700BB-CE/700BWB-CE/700BWBG-CE
1.1 System Configuration
This section describes the hardware required for the barcode data collection system used by the BHT and the BHT
software.
1.1.1 Hardware Configuration
In addition to the BHT, the following hardware is required for the barcode data collection system used by
the BHT.
Please note that certain components of the required hardware will differ depending on the type of
communication used.
Refer to "Chapter 3 Basic Preparation" – "3.4 Transmitting Data" for detail.
* BHT-700BWB-CE/700BWBG-CE only
** BHT-700BWBG-CE only
Host computer
BHT
Wireless LAN access point
(option)
CU-733 or CU-714
(option)
Connector
communication
CU-733 : RS-232C or USB
CU-714 : Ethernet
Ethernet
Wireless
communication*
Wireless base station
Bluetooth®-enabled
devices (option)
GPRS and EDGE
communication**
Bluetooth
communication
Infrared
communication