User`s manual

21
Barcode Handy Terminal
5. Insert the battery cartridge cover (1) tabs into the BHT
and load the cartridge in the direction shown by the
arrow (2).
6. Slide the battery cartridge cover release buttons (1)/(2)
in the direction shown by the arrows and return the
hand belt (3) to its original position.
Note The BHT is equipped with a back-up battery used to back-up the internal memory and calender
clock. The internal back-up battery is charged first a charged battery cartridge is inserted.
Do not remove the BHT from the charger for at least 2 days when using the BHT for the first time or
when using after long periods of time.
Point The indicator LED flashing in red indicates the following causes. The proper action stated below
must be taken.
Abnormal temperature of the battery cartridge is detected.
Charge the battery cartridge under the proper temperature (0~40)
Avoid places where there are objects generating heat nearby or exposed to direct sunlight.
Terminate charging and replace the battery cartridge if there are no objects generating heat
nearby.
The charge terminals contact failure
Wipe any dirt or dust from the charge terminals as described in “6.4 Daily Maintenance”.
The battery cartridge is broken or the battery life has ended.
Replace the battery cartridge.