User`s manual

BHT-700BB-CE/700BWB-CE/700BWBG-CE

2.4 Initial Setup

It is necessary to perform touch screen calibration and set the date and time when turning ON the BHT power for the

first time. Press the power key to turn ON the BHT power. The calibration screen should then display. If the calibration

screen does not display, first perform a “full reset”. Refer to “2.6 Resetting and Full Resetting” for details of the full

reset method.

1. Press the power key to turn ON the BHT power.

− Point − It may take time to display the screen after pressing the

power key, but it is not malfunction of the BHT.

Therefore, do not keep pressing the power key more

than needed or press it hard.

Doing so may cause breakage or malfunction of the

power key.

2. The screen on the right displays.

Tap the center of the “+” with the stylus for approximately 1 second.

Tap the center of the “+” each time it moves.

(The “+” mark moves from the center of the screen to the upper left, lower

left, lower right and upper right, making a total of 5 positions.)

3. Press the ENT key.

Press the ENT key or tap the screen to complete touch screen calibration

and display the data and time setting screen.

4. Set the date, time and time zone and then tap the OK button.

Power ke