User`s manual

32
BHT-700BB-CE/700BWB-CE/700BWBG-CE
3.1 Scanning Barcodes
Follow the procedure below to scan barcodes.
1. Turn the BHT power ON.
2. Bring the barcode reading window to a barcode
to be scanned, and press the trigger switch.
3. The BHT turns on the illumination LED
to scan the barcode.
Barcodes can be read also by pressing the Scan key.
When the BHT has read the barcode successfully,
the indicator LED will illuminate in blue.
− Point − The barcode scanning method may diffe
r
depending on the application. Perform
scanning in accordance with the
instructions provided in the application
User’s Manual.
− Note −  If required, clean dirty labels before scanning.
 It may not be possible to perform scanning in direct sunlight.
 If the barcode is on a curved surface, perform scanning in the center of the illumination LED
emission range.
 If the barcode reading window is pulled away from the barcode, the scannable barcode range will
become narrower than that of the illumination LED emission.
 Do not use the BHT in the vicinity of radio equipment. This may cause the BHT to malfunction.
Blue LED ON
Power key