User`s manual

65
Barcode Handy Terminal
IrDA Interface Settings
To perform communication with the host computer via the IrDA interface
port, specify “IrDA(COM4:)” for “Port”. The screen on the right displays.
Specify the same setting as that at the host computer for “BaudRate”.
All other data values are fixed at the values below.
“Databit” : 8
“Parity” : None
“StopBits” : 1
The communication environment settings following BHT initialization are
as follows.
Setting Default Value
Port IrDA(COM4:)
BaudRate 115200bps
LinkTimeout 30sec
RetransInterval 3000msec
TransTimeout 30sec
 Downloading
1. Specify the download destination folder and tap button (2)
to begin downloading.
− Note − If a file with the same name as one already in the same
folder is downloaded, the newly downloaded file replaces
the old one.
Download destination folder
(2)
2. Downloading is now complete.
The beeper sounds once (long beep) and the screen on the right displays.