User`s manual

73
Barcode Handy Terminal
3. The screen on the right displays when connection is complete.
If connection to the network fails…
If connection to the network fails, a warning beeper sounds three times,
and the screen on the right displays.
ν Solution
The wireless settings may be incorrect.
Refer to “4.4.3 System Properties” – “[8] Radio Frequency Menu (NIC
Control)”, or “4.5 Wireless Network Settings” and then make the wireless
settings.
If no partnership has been set up…
If no partnership has been set up between the host computer and BHT,
the beeper sounds three times, and the screen on the right displays.
ν Solution
Refer to “Chapter 5 Communication” – “5.6 ActiveSync” and set up a
partnership between the host computer and BHT.