User`s manual

BHT-700BB-CE/700BWB-CE/700BWBG-CE

[2] Beeper/Vibration

Double-tap “Beeper/Vibration” at the System Properties screen to display

the screen on the right.

This menu is used to adjust the beeper volume and switch between the

beeper and vibrator.

 Adjusting the Beeper Volume

Sets the beeper volume for each operation.

Beeper: Select the beeper volume from 0 (low) to

5 (high). (Default: 5)

Key clicks: Select the beeper volume when a key is

pressed. (Default: Loud)

Screen taps Select the beeper volume when screen

is tapped. (Default: Loud)

Trigger key clicks*: Beeper setting when the trigger switch is

pressed. (Default: OFF)

* The trigger switch can be assigned to magic keys.

 Switching between the Beeper and Vibrator

Select one of the following three patterns for notification of barcode

scanning completion.

Beeper: Beeper only (default)

Vibration: Vibrator only

Beeper/Vibration: Simultaneous beeper and vibrator