User's Manual

FCC ID: LXC-V2X-OBU‐HERC

This device is authorized for use with the specified antenna maximum gain values. Refer to the tables on the

previous page.

Regulatory Compliance Information:

- Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

- Replacement of any transmitter component (crystal, semiconductor, etc.) could result in a violation of

FCC rules.

- The FCC certification includes colocation (concurrent operation) of DSRC and LTE transmitters. They

should not be operated concurrently with any other transmitter or antenna.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm from all persons in

a vehicle.

Firmware settings:

All firmware settings, including power level and frequency tuning parameters are stored in firmware by

DENSO at the time of manufacture. No hardware components are adjustable after the product is

manufactured.

Part numbers:

Software version: BSP v0.2.3.3; Hardware: LXC-V2X-OBU‐HERC-001

FCC ID: LXC-V2X-OBU‐HERC