Specifications

4-12
4.2.5 Transfer Project
This command transmits the system project data. In the Robot Controller, this
command is used for backing up the data.
Data may be transmitted in a batch, or may be transmitted in parts by selecting
each Manager data from the transmission table.
Note: To transmit data selectively under the control of a manager other
than the System Manager, you can use the Transmit command in
the File menu of each respective Manager.
Fig. 4-11 All Data Batch Transfer Window
4.2.6 Project Information
Displays the set robot type or the project information for each Manager.
Fig. 4-11-1 Project Information Dialog Box
4.2.7 Exit
This command terminates the WINCAPSII application software.
The functional managers opened from the System Manager are simultaneously
terminated.