Specifications

Chapter 4 System Manager
4-17
Stop Bit Length
Select the stop bit length. Click on the arrow to display the options in a pull-
down menu.
Normal
Set all RS232C related items to normal settings.
Communication port : COM1
Baud rate : 19200
Parity bit : N-No parity
Data bit length : 8
Stop bit length : 1
[ 3 ] Telephone
Click on Telephone tab in ROBOTalk Manager dialogue box to display the
screen shown in Fig. 4-16.
Set the required data on this screen to enable connection between the
personal computer and Robot Controller using a telephone line.
Fig. 4-16 Telephone Tab
Modem
The above dialog box shows the currently selected modem. Click on the arrow
to display the options in a pull-down menu.
By clicking on Modem icon in the control panel, you can select a registered
modem.
For how to use the Modem in the control panel, refer to the instruction manual
for Windows 95.
Location
Select the location where the personal computer is used. Clicking on the arrow
to display the options in a pull-down menu.
You can select a registered location by the following dial settings: