Specifications

4-20
[ 5 ] Communication Log
Click on Comm. Log tab on the ROBOTalk Manager dialogue box to display
the screen shown in Fig. 4-18.
The communication log function is used for checking the communication state.
Use this function for checking the line condition, should you have a
communication error.
Fig. 4-18 Communication Log
Total Number of Transmitted Packets: Total number of packets transmitted
by WINCAPSII
Total Number of Received Packets: Total number of packets received by
WINCAPSII
Number of Transmitted NAKs: Number of NAKs (error packets)
transmitted by WINCAPSII
Number of Received NAKs: Number of NAKs (error packets)
received by WINCAPSII
Number of Received NAKs (Standby): Number of NAKs (error packets)
received by WINCAPSII except the
errors caused in response to the
transmitted packets
Number of Timeout Occurrences: Number of timeouts except the timeout
errors caused in response to the
packets transmitted by WINCAPSII
Note: If timeout occurs for reasons other than connection failure, extend
the timeout duration as noted in Chapter 4 “Setting Option” on
page 4-15.