Specifications

4-26
"
STEP 5
When the data is read normally, an indication to that effect appears.
Click on Complete.
4.3.5 Write FD Images
Data can be exchanged by using a floppy disk as the media between the
personal computer and the Robot Controller, instead of data transmission
using communication.
When recording data to a floppy disk, write the FD images.
"
STEP 1
Select Write FD Image from the Tools menu.
A dialogue appears requesting you to save the project. Click on Yes.
Save the data using the same method as selecting Save Project
command in the File menu.
Note: Always save the project data. If FD image is written without
saving the project data, the present state may not be
written.