Specifications

4-30
4.4 Window Menu
Fig. 4-20 Window Menu
4.4.1 PAC Manager
Start the PAC Program Manager.
The PAC Program Manager may be started by clicking on the PAC Program
Manager button
.
For details on the PAC Program Manager, read Chapter 5, “Operating PAC
Program Manager” and Chapter 3, subsection 3.5 “Entering and Editing
Program” on page 3-22, of this instruction manual.
When PAC Program Manager is connected to the Robot Controller, the button
icon display changes to
.
4.4.2 Variable Manager
Start the Variable Manager.
The Variable Manager may be started by clicking on Variable Manager button
.
For details on the Variable Manager, refer to Chapter 6 “Operating Variable
Manager”. For operating procedures, refer to Chapter 3 “3.14.1 Starting
Variable Manager” in this manual.
While Variable Manager is connected to the Robot Controller, the button icon
display changes to
.
4.4.3 DIO Manager
Start the DIO Manager.
The DIO Manager may be started by clicking on DIO Manager button
.
For details on the DIO Manager, refer to Chapter 7 “Operating DIO Manager”.
For operating procedures, refer to Chapter 3 “3.13.1 Starting DIO Manager” in
this manual.
While DIO Manager is connected to the Robot Controller, the button icon
display changes to
.