Specifications

Chapter 6 Operating Variable Manager
6-25
6.5.2 RS232C Dummy Input
Note: To execute RS232C Dummy Input command, ensure the following
conditions are met:
•
••
• RoboTalk is set in RS232C.
•
••
• Each WINCAPSII manager is not connected. Since RS232C
Dummy Input command uses the RS232C port of the personal
computer. Therefore, if a Manager is connected to the Robot
Controller, an error will occur due to conflict.
The message entered in the dialogue box is transmitted to the Robot Controller
via RS232C.
Use this function when debugging the program.
If you execute RS232C Dummy Input command without connecting the robot,
the personal computer teaching system behaves as if it has transmitted the
data to the RS232C of Robot Controller.
You can choose a delimiter from between [CR+LF] and [CR] as an end code
attached to the output character string.
6.5.3 Calculator
Displays the standard Windows calculator. If the calculator is not installed, a
message reading “Could not find the file” appears on the screen.