Specifications

Chapter 7 Operating DIO Manager
7-1
7.1 Outline of DIO Manager
7.1.1 Outline of Functions
The DIO Manager can monitor I/O status and/or manage the I/O layout table.
In addition, the program can be debugged prior to the completion of the facility
to test the program by adjusting Dummy SW ON or OFF to vary the I/O state
falsely.
When the MONITOR SW is turned ON or OFF and the DIO Manager
connected, the status of an I/O can be changed.
There are three methods for displaying I/Os: table, oscilloscope and panel.
The DIO Manager window appears on the screen when DIO Manager is
started.
The DIO Manager can select a standard mode or conventional interchange
mode for I/O layout. For details, refer to 7.5.1.4 “Hardware”. For information
regarding the standard mode and conventional compatible mode for I/O layout,
refer to chapter 5 “Robot Controller Interface” in Owner’s Manual (Installation &
Maintenance).
Fig. 7-1 DIO Manager Window
The following are the functions of the DIO Manager.