Specifications

Chapter 7 Operating DIO Manager
7-3
7.1.3 Table Item
Fig. 7-2 Table Items
• Number: I/O layout number.
• State: Status of I/O. In the MONITOR state, it indicates the status of
the Robot Controller I/O or the emulated I/O (memory) in the
personal computer. It is able to operate (ON-OFF) the Robot
Controller I/O or the emulated I/O in the personal computer
except when in the continuous monitor state.
In the connected state the Robot Controller I/O is the object of
action while in the disconnected state the emulated I/O in the
personal computer is the object of action.
• Type: I/O layout type. Display only and not for editing.
• Application: I/O layout application. Can make entry as a comment. Double
clicking enables entry.
• Macro name: I/O layout macro name. Corresponds to the I/O macro name
and the I/O number described in the macro definition file
dio_tab.h. Double clicking enables entry.
• Monitor SW: Specifies whether to monitor or not. Turns ON-OFF by double
clicking.
• Dummy SW: Specifies whether to use the actual I/O of the Robot Controller
or the dummy SW (emulate memory). Turns ON-OFF by
double clicking. When turned ON the DUMMY SW (emulate
memory) is used. Unless the dummy I/O
button is set to
ON, the Dummy SW setting is not enabled.