Specifications

Chapter 8 Operating Arm Manager
8-13
8.3 Edit Menu (Arm Manager)
This menu is for editing the object tree.
Fig. 8-13 Edit Menu
8.3.1 Cut
Cuts data out of the selected range. The cutout data can be used with the
Paste command.
Note: Only the selected data is cut out. Note that the data that exists on
the lower level than the selected data will be also deleted.
8.3.2 Copy
Temporarily stores the same data as in the selected range. Data temporarily
stored by copying can be used in the PASTE command.
8.3.3 Paste
Pastes temporarily stored data by cutout or copying to a specified location.
8.3.4 Rename
Open the object tree, specify an object and use RENAME to change the name
of the object.
8.3.5 Reconfigure
Re-draws the display of the object tree and displays only the root object.