Specifications

8-22
8.6.1.8 Display
Click the Display tab to set the display option between Show and Hide.
This display tab appears when the user level is higher than the programmer.
Fig. 8-24 Display Tab (Options Dialog Box)
•
File extension menu: Extends the Files menu of the Arm Manager. For
details, refer to 8.1.5 “Menu List”.
• Auto Update (automatic acquisition of snapshot):
If you change the window size or scroll the screen
when the Arm Manager is connected or in the process
of connection to the Robot Controller, the Manager
automatically monitors the snapshot.
• Only when the "Permission of CALSET transmission" is selected, CALSET
data (RANG, CALSET values) may be transmitted. This is to avoid
unexpected transmission of CALSET data.
This option is not selected by default.
Note:The RANG and CALSET values differ in each robot. When
transmitting them, make sure that correct data is set up for
transmission. If the robot controller receives incorrect data, the
robot will not run normally.
For details about "CALSET," refer to the INSTALLATION &
MAINTENANCE GUIDE.
• You may choose the use of hardware accelerator.
If enabled, the hardware accelerator will make Arm Manager draw faster on
screens according to the "Graphic hardware accelerator" settings of your PC.
If you modify this setting, restart WINCAPSII to make it go into effect.
Note: Depending upon graphics drivers installed in PCs, the hardware
accelerator may cause Arm Manager to fail to display correctly in
some cases. If such occurs, disable the hardware accelerator.