Specifications

Chapter 9 Operating Vision Manager
9-11
9.2.5 Transfer
9.2.5.1 Transmitting Set Data
Transmits set data between the Robot Controller and the personal computer.
This function is used for transmitting set data edited by the Vision Manager or
for receiving Robot Controller (backup) set data.
To transmit set data, it is necessary to be connected to the Robot Controller.
For instructions how to establish a connection, refer to Chapter 9 “9.3.1
Connect” in this manual.
9.2.5.2 Transmitting Image Data
Image data is transmitted between the teaching panel and the Robot Controller
(Ver.1.5 or before: Process screen 0 to 3, Ver.1.6 or later: + Camera screen 0
to 1). The teaching panel displays the images of the currently held image data.
If nothing appears on the teaching panel, no image data is being held.
Note1: If no image data is held, only
receiv-ing is enabled.
2: Camera screen is only for receiving.
Teaching panel