Specifications

Chapter 9 Operating Vision Manager
9-17
9.3 Actions Menu
9.3.1 Connect
Sets the connection object (edit object) of the Vision Manager. By establishing
a connection, communication with the Controller becomes possible. As a
result, editing of the controller setting (window and search model) and image
analysis can be performed. If set for non-connection, the Vision Manager sets
the file on the personal computer as the object to be edited.
Connection selection method 1:
Q Click on Actions in the menu bar. The Actions menu
appears.
R Click on Connect.
The Vision Manager is connected and disconnected
alternately each time this command is issued.
Connection selection method 2:
The connection ON/OFF state alternates also when
you click on
in the tool bar.
- Display of Connection State -
The connection state is indicated by the pressed state of CONNECT button
in the tool bar or a checkmark in front of Connect in the Actions menu.
Disconnected Connected