Specifications

9-22
9.4.1.2 General Setting
Click the General Setting tab to make various settings for Vision Board.
For parameter definitions and element numbers, refer to “Appendix” in Owner’s
Manual (Programming).
Note: If you put a checkmark at Create Header File and select OK, the
parameter macro definition file “vis_cnf.h” is automatically
created. To use macro name with GETENV and LETENV in PAC
language, you must include this file.
Q Double-click the cell (A) to change the set
value.
The cell character is displayed in reverse
video.
R Enter a value. The entered value appears
(is inserted) in the reversed value position.
S Click OK to register the changed value.
Click Cancel to invalidate the changed
value.
T Click Back to Standard to restore the
default value settings.
(1) Shutter method
Set the camera shutter system for each camera.
0: Field shutter 1: Frame shutter
(2) Input upper/lower limit level
Set the camera input level and the camera output signal relationships for
each camera.
By changing the upper/lower limit, the pertinent camera output signal can
be input, in more detail.
Always set the lower limit value to value lower than the upper limit value.
(Upper limit value > Lower limit value)
A