Specifications

Chapter 9 Operating Vision Manager
9-33
9.4.4 Edit Search Model
To edit a search model in the Robot Controller, it is necessary to get the Robot
Controller information on the personal computer, in advance. For the method of
getting information, refer to Chapter 9 “9.3.2 Get Info” in this manual.
9.4.4.1 Search Model Edit Tool
Edit (register, delete, etc.) the search model. Editing of a search model is
possible only when the Vision Manager is connected to the Robot Controller
with a built-in vision board.
Search model edit tool
Note: If the Robot Controller is not capable of angle measurement, you
cannot set any data at Offset Angle.
Displays the search model images to vision monitor.
Newly creates a search model.
Deletes an edit object search model.
Registers the edit object search model.
Displays the previously displayed tool.
Displays an edit object search model.
Displays the edit object search model information.
Inputs the camera images.
Displays the camera images.