Specifications

Chapter 9 Operating Vision Manager
9-35
9.4.4.3 New
Use the New command to register a search model. When the search model is
newly created, the search model edit tool shows the range of images to be
registered to the vision board. To register the search model image to the vision
board, a registration process is required.
Search model edit tool Q Click on in the tool bar.
The search model edit tool appears.
R Click on New.
The Create model dialog box
appears.
S Set the search model number (A).
(By default, an unused search model
number is automatically set.)
T Click on OK.
Default search model data appears
as the set values (B).
The search model shape appears on
the teaching panel.
The shape also appears on the
vision monitor if the Vision Manager
is connected with the Robot
Controller.
Teaching panel U Drag the search model shape
displayed on the teaching model
with the mouse to adjust it.
When the shape is changed, the
value appears as the search model
edit tool set value (B).
When changing the shape, refer to
Chapter 9 “9.4.4.5 Editing Search
Model with Teaching Panel” in this
manual.
V Click on Register.
Register the image, in the range
specified with set value (B), in the
search model edit tool, to the vision
board.
B
A