Specifications

Chapter 9 Operating Vision Manager
9-65
[ 3 ] Setting Measuring Conditions
Object window The range of a specified window shall be the object of measuring.
Search model
Runs the search/process inside the window by using a specified
search model.
Concordance
Position having the concordance value greater than specified will
be handled as the result.
Unit of detection
Specifies accuracy (pixel or sub-pixel) of the coordinates to be
search-measured. If measured with sub-pixels, longer measuring
time is required.
Maximum
number of
detection
Specifies the number of results obtained from a search-measuring.
If the number of results reaches the value specified with the
maximum number of detection, the measurement ends normally.
If the number of result fails to reach a specified maximum number,
TIMEOUT error will be generated. In this case, reduce the
maximum number.
Start Angle
End Angle
Specify the rotation range of the object to be searched and
measured.
The Vision Manager measures the object of which angle from the
origin resides between the preset start and end angles.
9.4.6.9 Reading Code
[ 1 ] Code Reading Measuring Tool
Read the QR code in the specified window.
Code reading measuring tool
Displays the previously displayed tool.
Displays the window edit tool.
Displays the camera screen.
Specifies the presence of automatic binary-coded measuring.
Displays the measuring
Character string.
Inputs the camera images.
Specifies the presence of automatic binary-coded.
Displays binary-coded level.
Specifies a window for specifying the range of
measurement.
Runs code measuring.
Displays binary-coded register tool.