Specifications

1-6
1.2.3 Modem Connection
This subsection describes how to connect the robot with a remote personal
computer through the telephone by connecting a modem to the RS232C
communication port of the robot controller.
This connection method requires a serial communication port obtained by
connecting a modem to the personal computer.
Figure 1-5 shows the RS232C communication port of the robot controller to
which the modem is connected.
Refer to “Communication Cable” in Owner’s Manual (Installation &
Maintenance) regarding the communication cable for connection with a
modem. Select the cable that meets the specifications of the modem to be
used.
Fig. 1-5 Connection of the Robot Controller and Modem
Robot controlle
r
Operating panel
Modular wall
Modem
TEL
Teach pendant
Power cable
Cable to
the main body
RS232C
Robot