Specifications

Chapter 10 Operating Log Manager
10-3
10.1.1.4 Control Log
Click the Control Log to record the command value, encoder value, current
value and load ratio for each respective operating axis. Although the number
of control axes differs by model, the record for the number of control axes is
retained. To acquire the control log, run the operation given in 10.2.5 “Receive
Data” on page 10-11 and receive the Control Log from the robot controller.
Fig. 10-4 Control Log
10.1.1.5 Communication Log
This log is used for checking the status of communication. It is the same thing
as the communication log in Communication Manager. To acquire the
communication log, run the operation given in 10.2.5 “Receive Data” on page
10-11 and receive the Communication Log from the robot controller.
Fig. 10-5 Communication Log