Specifications

10-4
10.1.1.6 Version
Records the version of each respective section of the Robot Controller. To
acquire the version log, run the operation in 10.2.5 “Receive Data” on page 10-
11 and receive the Version Log from the robot controller.
Fig. 10-6 Version
10.1.1.7 Error Detection
If an error occurs, the error detection lamp in the Log Manager window
changes from green to red and the detected error appears in the Search
conditions (C) dialogue box.
The error detecting conditions correspond to the error detection settings in the
Set dialog box which is displayed using the Set command in the Tools menu.
Clicking on Program starts the application specified as the start program in
Error detection of the Set dialog box.
For information regarding Error detection in the Set dialog box, refer to 10.5.1.4
“Error Detection”.
Note: No error is detected unless the error and monitor buttons are
turned ON.
Fig. 10-7 Error Detection
Error detection lamp
Green: No error
Red: Error detected
Search conditions (C)
dialog box
Program start