Specifications

Chapter 10 Operating Log Manager
10-19
10.4 Actions Menu (Log Manager)
Commands arranged in this Actions menu can be also specified by the buttons
shown below.
Fig. 10-25 Actions Menu and Buttons
10.4.1 Connect
Makes connection for communication with the Robot Controller.
When connected, the menu has a check mark.
The CONNECT button
works the same way as the CONNECT command.
When connected, it is displayed as if depressed.
10.4.2 Snapshot
Acquires the instantaneous data from the Robot Controller.
The SNAPSHOT button
works the same as the SNAPSHOT command.
To run the snapshot command communication must be set up in advance.
10.4.3 Monitor
Acquires data in succession from the Robot Controller.
The MONITOR button
works the same as the MONITOR command.
To run the monitor command communication must be set up in advance.