Specifications

Chapter 10 Operating Log Manager
10-21
"
STEP 3
Click the button of Arm Manager to enter Monitor status.
"
STEP 4
Click the button.
This completes the preparation. Run respective reproduction operation
according to the following descriptions:
Start 1-Step
Reproduces one step portion of the currently selected control log.
Start 1-Cycle
Reproduces robot action using the Arm Manager and the command value
recorded in the control log of Log Manager every 8 msec.
The playback button
works the same way as the Reproduce Control Log-
Start 1-Cycle command.
Stop Step
When reproducing the current control log motion this will stop such motion.
The control log motion stop button
works the same way as the Reproduce
Control Log-Stop Step command.
10.4.8 Graph Control Log
Graphically displays the data recorded in the control log.
The graph button
works the same way as the Graph Control Log command.
STEP 4
Log Manager