Specifications

10-28
Error
occurrence
Recording data
(in non-buffer mode)
Recording stopped
due to error
Recording data
(in ring buffer mode)
Buffer file full
or StopLog
ClearLog
StopLog
Error recovery
or ClearLog
StartLog
Power ON
Saving into flash
memory
Saving instructed from the
teach pendant or operating
panel
Log data deletion
instructed from the
teach pendant.
Saving instructed from the teach
pendant or operating panel
Error occurrence
Recording stopped
due to full buffer
10.7 New Control Log (Ver. 1.20 or newer)
10.7.1 New Control Log Function
WINCAPSII version 1.20 or newer supports a new control log whose operation
status will change as illustrated below.
NOTE: A flash memory refers to an area which preserves data even if power
supply is cut off.
When the power is on, control log is always recording data in ring buffer mode.
The buffer size for this can be specified by the user.
Data recording will be aborted due to an error occurrence (Error 6000's Level 3
or higher) or by StartLog or StopLog.
ClearLog or removing error will start data recording. (ClearLog will be
automatically called up when data is preserved from the ring buffer to the flash
area or to WINCAPSII.) Control log can be fetched only from WINCAPSII.
If recording is aborted, data can be fetched from the ring buffer or the flash
area.