Specifications

Chapter 10 Operating Log Manager
10-29
NOTE 1: If the log is switched from a recording stop (recording aborted) to the
ring buffer mode after the removal of an error, data can be fetched until the ring
buffer will stop next. If ClearLog is executed, data can be no longer fetched.
NOTE 2: If the log is switched to a recording stop due to a full buffer by user
operation, it cannot be switched back to the ring buffer mode until it gets
ClearLog.
NOTE 3: If any error occurs during data fetching from the ring buffer, the error
log will not be recorded.
10.7.2 User's Operations While Using Control Log
User's operations which the user performs related to control log are as follows:
- Setting the ring buffer for preserving data. (Subsection 10.7.3)
- StartLog (Subsection 10.7.4)
- StopLog (Subsection 10.7.5)
- ClearLog (Subsection 10.7.6)
- Saving or deleting control log to/from the flash area. (Subsection 10.7.7)
- Fetching control log (Subsection 10.7.8)
- Saving control log to floppy disks (Subsection 10.7.9)