Specifications

Chapter 10 Operating Log Manager
10-33
Log saving/deleting procedure from the teach pendant
Access: Top screen –[F2 Arm]–[F6 Aux.]–[F11 Log]
Control Log Menu
[F7 SaveLog.] Saves the control log into the flash memory.
[F12 DelLog.] Deletes the control log from the flash memory.
10.7.8 Fetching Control Log
You may fetch the control log only in WINCAPSII. Receive the control log from
LogManager.
Fetching Control Log in WINCAPSII
To fetch the control log from the flash memory, you need to check the flash
memory beforehand.
NOTE: Checking the flash memory is possible only with control log. It has no
effect on sending/receiving other data.