Specifications

2-18
"
STEP 4
Select RS232C(R) in the Communication Device column.
Set the data as shown below in the Optional Settings column.
Timeout : 4000 msec
Retry : 5 times
Communication retry : 5 times
"
STEP 5
Click on RS232C tab.
The ROBOTalk Manager window will change as follows:
Select a communication port to use on the personal computer in the COM
Port column. Select it according to the specifications of the personal
computer.
For the Baud Rate column, select the same speed as is set for the robot
controller.
"
STEP 6
Click on OK.
The ROBOTalk Manager window closes.
This completes the communication settings for the personal computer.