Specifications

3-2
"
STEP 2
The WINCAPS II Information window appears. Read the information and
click OK.
Note: If you click the check box “Omit this message” at the lower
left of the screen, the above window will not appear from the
next startup operation.
"
STEP 3
The License Information window does not appear until you enter your
license key. Enter User ID printed in the license card and click OK.
Note: For detail on entering the license key, refer to 4.5.3 License
Key. Once you enter your license key, this window will not
appear from the next startup operation.
"
STEP 4
When starting the System Manger after initial installation of WINCAPS II,
create a program bank.
Note: When the dialog box “Create Program Bank” appears,
specify the files to be used in the program bank according to
the procedure described in “5.6.2.3 Updating Program
Bank”.
"
STEP 5
You need to create a project when activating the WINCAPS II for the first
time after installation, because no system project has been defined.
Note: If a dialog box “Create New Project” appears, create a project
for the robot to be connected by referring to “4.2.1. New
Project”.