Specifications

Chapter 3 Starting Teaching System and Knowing Each Manager
3-3
"
STEP 6
When the WINCAPS II is activated the second time and after, the dialog
box "Open Project" appears. Select a desired project. The default is the
previously used project.
"
STEP 7
The Password window appears. Select the user level from the pop-up
menu, enter the password if necessary, and then click OK.
Note: For the password, refer to “1.3.2 Password”.
"
STEP 8
The dialog box appears with the message “Connect with the controller? ”.
Click No.
The System Manager is activated and the System Manager window
appears. The icon buttons are used to activate the modules classified by
the function.
To use each of these function modules, click the required module icon or
select the required function from the command menu in the System
Manager window.