Specifications

4-2
4.1.2 Tool Bar
Fig. 4-2 Tool Bar
PAC Program Manager Button
Click on this button to start the PAC Program Manager.
For descriptions on the operating procedures of the PAC Program Manager,
refer to Chapter 5 “Operating PAC Program Manager” and Chapter 3 “3.5
Entering and Editing Programs” in this manual.
When the PAC Program Manager is connected to the Robot Controller, the
button icon changes to
.
Variable Manager Button
Click on this button to start the Variable Manager.
For Variable Manager operating procedures, refer to Chapter 6 “Operating
Variable Manager” and Chapter 3 “3.14.1 Starting Variable Manager” in this
manual.
When Variable Manager is connected to the Robot Controller, the button icon
display changes to
.
DIO Manager Button
Click on this button to start DIO Manager.
For the procedures for operating DIO Manager, refer to Chapter 7 “Operating
DIO Manager” and Chapter 3 “3.13.1 Starting DIO Manager” in this manual.
When the DIO Manager is connected to the Robot Controller, the button icon
changes to
.
Arm Manager Button
Click this button to start the Arm Manager.
For the procedures for operating Arm Manager, refer to Chapter 8 “Operating
Arm Manager.”
When the Arm Manager is connected to the Robot Controller, the button icon
changes to
.
Tool bar
PAC Program
Manager button
Variable Manager button
DIO Manager
button
Arm Manager
button
Vision Manager
button
Log Manager button
Communication
set button